jglass
Junior Member
- Joined
- Feb 19, 2016
- Posts
- 21
- Reaction score
- 9
- Location
- Broken Arrow, OK
- Ram Year
- 2019
- Engine
- Hemi 5.7
So I installed 2 18w 4" LED pods on the back of my 2013. I tied them into the trailer hitch wiring, and they work great. I put the truck in reverse they come on, I flip the manual switch they come on. All is well...until. Until I am backing up and look at my camera display, and it's all fuzzy.
I installed these off the reverse, ground, and battery constant wires on the hitch (I attached a diagram of how I did it). I metered my diodes to make sure I wasn't getting any feedback from the reverse or constant wires. Nothing, not even MV. So I'm left with 2 possibilities. 1 in getting some kind of EMF interference from the wires running parallel with the camera wires. Or 2 the shared ground is doing it.
What do you guys think?
I installed these off the reverse, ground, and battery constant wires on the hitch (I attached a diagram of how I did it). I metered my diodes to make sure I wasn't getting any feedback from the reverse or constant wires. Nothing, not even MV. So I'm left with 2 possibilities. 1 in getting some kind of EMF interference from the wires running parallel with the camera wires. Or 2 the shared ground is doing it.
What do you guys think?