mildlyhispanic
Junior Member
Hey guys. So having an issue with my backup camera. Bought the truck used and it had already had an aftermarket radio and backup camera installed. Recently the camera started working intermittently and then just completely died out. So I’ve purchased a new one and run the wires and all that. Since there was already one installed I just replaced the new harness and wired the exact same on the same spots. Have it wired red into the reverse light right behind the plug and the black wire into the black ground for the same plug. Obviously rca into the proper camera plug. But I’m getting no picture at all. The radio screen is switching properly when I go into reverse it’s popping up a black camera screen. Any tips?
Last edited: