33x12.5r20 Kill Front End?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
Went from MT to skinny AT (275/60r20) and not liking the look of the skinny tire. I have 20x9 with 0 offset rims and thinking of going to a 33x12.5r20 or 305/55r20 but will that destroy my front bearings and steering?

I believe everything up front is stock (93k miles) except for track bar, coils and shocks
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
I should mention the truck would only see 6-7k miles a year with this setup
 

auskip07

Member
Joined
Aug 13, 2015
Posts
92
Reaction score
15
Ram Year
s
Engine
s

if you have 93k and havent changed your bearings, bushings, etc you might want to go ahead and do that.

You honestly already know the answer to your question. Yes bigger tires cause more stress on those components.
 

R/T_Fire

Senior Member
Joined
Feb 3, 2015
Posts
3,432
Reaction score
1,205
Location
Pleasant Grove
Ram Year
2011
Engine
Hemi 5.7
You should be fine since stock they come with a tire that is pretty much a 33" tire... The negative results will be so minimal you won't notice anything... but with almost 100k its time to inspect and or replace a lot of the front end wear parts.

I like to change my wheel bearing no matter what at 100k. and any steering or ball joints that are showing the slightest signs of wear....
 

sriley531

Senior Member
Joined
Feb 4, 2016
Posts
458
Reaction score
359
Location
Ohio
Ram Year
2014
Engine
5.7 Hemi
You should be fine since stock they come with a tire that is pretty much a 33" tire... The negative results will be so minimal you won't notice anything... but with almost 100k its time to inspect and or replace a lot of the front end wear parts.

I like to change my wheel bearing no matter what at 100k. and any steering or ball joints that are showing the slightest signs of wear....
^^^ What he said ^^^
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
Any good write ups that you guy know about off the top if your head on what exact parts should be replaced on the front end?
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
Actually all I have to do is replace some the hub assembly and tie rods on my my steering and im good to go? Do I need to do the rear bearings?
 
OP
OP
M

Magnum5.9

Senior Member
Joined
Aug 8, 2014
Posts
541
Reaction score
66
Ram Year
01 ram 1500 4x4
Engine
Magnum 5.9
I apologize for the grammatical errors, trying to do this on my phone is a pain
 
Top