Whats the biggest tire I can fit with a 2.5inch lift??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bassslayer25

Senior Member
Joined
Feb 7, 2014
Posts
2,052
Reaction score
774
Location
East, Kansas
Ram Year
2000
Engine
5.9 360 V8
So as the title says Im wondering what the biggest tire is I can fit with a 2.5 inch lift. Im running 285/75/16 right now on aftermarket ion alloy rims. I have a ton of room in both front and rear. Im looking at 315/75/16s. Can I fit those or are those way to big?
 

Johnn123

Senior Member
Joined
Sep 23, 2013
Posts
2,090
Reaction score
1,099
Location
Ontario
Ram Year
2010
Engine
5.7L Hemi
You could run a 305/70/16 no problem on a wheel with enough backspacing. I had 315's on stock rims and they rubbed the c-arms on lock. I wouldnt run a 315 without at least 4.10 gears, 4.56 would be ideal. To much extra drive train stress with stock 3.55. 4.10 gears plus 315/75/16 wasnt a very fun combo when I ran it IMO.
 

mhylman

Junior Member
Joined
Jul 24, 2013
Posts
29
Reaction score
4
Location
Terre Haute, IN
Ram Year
2004
Engine
5.7 Hemi
I had 315 tires on 3rd gen 17s on my 1997 Ram 2500 stock suspension. Clears the wells fine but as johnn stated it rubs when cranking the wheel. I fixed it by adding 2 inch wheel spacers from rough country. If you got a 1500 it might be different as I believe a 2500 sits about 2 inches higher from stock. And I also had 4.10 gears front and rear. Any less of a gear and your speedo will be off and you'll notice drag at take off.
 

rammanriley20

Senior Member
Joined
Nov 4, 2013
Posts
1,502
Reaction score
790
Location
iowa
Ram Year
1999 Ram 1500
Engine
5.9 Mag
you could pry get some 34's in there with some minor trimming, maybe 35's with some fender liner removal
 

headhunter123

Member
Joined
Feb 21, 2015
Posts
99
Reaction score
16
Ram Year
1997
Engine
5.9 V8
I have 35x12.50x17. The rims came from an 04. They fit nicely but if you max out the wheel turning, some scraping will go on. That's if you only max out the turns fully turned left or right.
 
Top