Pin connector removal tool

Wicklundwf · Jun 19, 2017

I have a bad wire that's too close to a multiwire connector. I have looked on eBay for a pin removal tool to better repair the wire. Which pin connector removal tool do I need?

dudeman2009 · Jun 20, 2017

If you're talking about the wire terminals, you're better off buying a set and matching it up to one from the set.

Wicklundwf · Jun 20, 2017

Ok so your saying to buy the correct connector and splice the dozen or so wires because of 1 bad wire? It's the large connector that's behind the driver's side fender by the frame.

dudeman2009 · Jun 22, 2017

Wicklundwf said:
Ok so your saying to buy the correct connector and splice the dozen or so wires because of 1 bad wire? It's the large connector that's behind the driver's side fender by the frame.

No, there are kits that have wire terminals of various size and design, that way you can match up the one you have among a whole set instead of paying a premium on a single terminal to possibly get the wrong one.

Something like this:
https://www.amazon.com/dp/B01LBRWZVC?psc=1

I have one similar to this myself:
https://www.amazon.com/Delphi-Weath...rd_wg=CbxXw&psc=1&refRID=Z83HC00A8EYAR2F84TV6

You dont even need to replace the connector body, you can just pull the terminal out and re-terminate it, as for the removal tool, this is what I have:
https://www.amazon.com/OTC-4461-6-P...rd_wg=m5X08&psc=1&refRID=YH2XN686F3PMWBRR3505

Wicklundwf · Jun 25, 2017

Thanks for the clarification. Great info.

Pin connector removal tool

Wicklundwf

Junior Member

dudeman2009

Senior Member

Wicklundwf

Junior Member

dudeman2009

Senior Member

Wicklundwf

Junior Member

Similar threads

Latest posts

Staff online

Members online

Forum statistics

Share this page