yohan
Junior Member
- Joined
- Jan 12, 2017
- Posts
- 26
- Reaction score
- 5
- Ram Year
- 2013 Ram 1500 ST Quad 4x4
- Engine
- V6 3.6L Pentastar
The new wheel doesn't have the gear buttons. Do you need those? If so you could take them off your current wheel and put them on the new one before you install it.
The new wheel will have the correct harness inside it, you should be good to just swap if you don't need the gear buttons.
If you use the stock RA1 bezel be prepared to push on it kind of hard to get it to click in place over the RA4. I ran like that for a bit before we were able to make the conversion harnesses to use the correct 8.4 bezels.
I wonder what this button does?
I do need the gear +/- .. haven't quite figured out what they do other than preventing upshift passed the selected gear but thats for another thread.
yea I will just pull the gear buttons from my old steering wheel. I got it for $125CAD+shipping, stoked to get this mod going!! Need me some hands free.