RonJon '06
Senior Member
- Joined
- Jan 2, 2014
- Posts
- 3,372
- Reaction score
- 1,183
- Location
- Southern Minnesota
- Ram Year
- 2014, 1985
- Engine
- 6.7, 360
I have a spare winch and was thinking about putting it on my 2006 1500 Megacab 4x4. I have a 120V, 110/90 amp wire feed welder and a new bottle of C25.
First Question is will that welder be big enough to fashion a bracket/mount for attaching the winch to the frame? I can also get a 220V stick welder.
Second I think the best plan would be to make something that will bolt onto the frame but if I do need to weld anything onto the frame is disconnecting the battery good enough or do I need to remove or disconnect the PCM or any other electronics?
First Question is will that welder be big enough to fashion a bracket/mount for attaching the winch to the frame? I can also get a 220V stick welder.
Second I think the best plan would be to make something that will bolt onto the frame but if I do need to weld anything onto the frame is disconnecting the battery good enough or do I need to remove or disconnect the PCM or any other electronics?