Moose Knuckle
Member
Need help with installing a DPF Delete. Buying one he soon and have no idea how to install it. minus the installation of the down pipe. What else do i need to know?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I see you have an '08 listed in your profile. If that is the truck you are doing this on you have it pretty easy.Need help with installing a DPF Delete. Buying one he soon and have no idea how to install it. minus the installation of the down pipe. What else do i need to know?
And keep the DPF system. One day it will be law to reinstall it and they'll be worth they're weight in gold.
I see you have an '08 listed in your profile. If that is the truck you are doing this on you have it pretty easy.
Step 1 install delete tuner
Step 2 unplug all connectors for sensors attached to exhaust pipes you are removing
Step 3 install new exhaust pipes
Step 4 drive truck with huge smile on your face.
Thats pretty much it.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Depends on your delete exhaust kit. I just did a delete pipe from Flo~pro which is 100% bolt on. No welding required.As easy as that? Hardest part is welding I take it?
And keep the DPF system. One day it will be law to reinstall it and they'll be worth they're weight in gold.
This. Absolutely do not get rid of it
Depends on your delete exhaust kit. I just did a delete pipe from Flo~pro which is 100% bolt on. No welding required.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Will a Bully Dog GT programmer work?
Sent from my iPhone using Tapatalk
I don't think so. If I were you I'd find an old h&s race tuner that does deletes, or get efi live. Efi live would be about the best due to how customizable it is.
Depends on your delete exhaust kit. I just did a delete pipe from Flo~pro which is 100% bolt on. No welding required.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Any stainless should be fine. I know some guys made their own with a section of 4" exhaust pipe and just welded a flange to mate up the the down pipe.Can I use any stainless steel pipe or is there something specific behind the delete pipe?
Will a Bully Dog GT programmer work?
Sent from my iPhone using Tapatalk
Can I use any stainless steel pipe or is there something specific behind the delete pipe?
might want to look into doing a egr plates while your at it. Dodge 6.7 2007-2008 EGR/Cooler Delete
Also H&S used to have a kit that I installed on an 08 that had a plug in fooler at each sensor in the exhaust. worked well and you could run any tuner of choice as all it did was tell the computer the dpf was there and operating in range. but I cant get on HSperformance website to see.
Its a very easy installation and the one I put in was a turbo back bolt in system with no welding, cutting or anything required. We made our own EGR block of plates though. truck ran way way better, fuel mileage increased and so did power and response. that truck I installed a Edge Juice chip. but would recommend a H&S minimax or EFIlive if you have a good diesel shop that knows how to tune with it.