Lowered 3rd Gen Pics - Show Em Off!

[Silver Bullet]

Sent from my iPhone using Tapatalk

 

[Silver Bullet]

Sent from my iPhone using Tapatalk

 

[usaf2006]

Woah woah woah... No details? That truck is sick. I'm digging the look of the roof rack on the low truck. So much going on, but tastefully done. Very nice truck..

 

[TxMoparKid]

Hard to stop staring! Great lookin rides.
Anyone have a link to a previous thread or can advise on best mfr package or parts list to flip and c-notch the rear of my 05 RC? Have Calmax 3" arms and 1"springs for front, looking for 5-6" in back and can't decide.

 

[usaf2006]

If you buy mcgaughys flip kit and c notch combo, it's about $450 from their site I think.

 

[TxMoparKid]

If you buy mcgaughys flip kit and c notch combo, it's about $450 from their site I think.

Thanks usaf. Read every link on here and McG seems to be the one. Can't wait to share the lower drop pics.

 

[HeavyD]

I used DJM flip kit - no c-notch yet.

 

[Silver Bullet]

Hard to stop staring! Great lookin rides.

Anyone have a link to a previous thread or can advise on best mfr package or parts list to flip and c-notch the rear of my 05 RC? Have Calmax 3" arms and 1"springs for front, looking for 5-6" in back and can't decide.

I'm pretty sure and Rc rear end is flipped already. Only the QC's require a flip kit
Look at blocks, different leaf spring packs and a c notch . Post up a picture of the rear end set up


Sent from my iPhone using Tapatalk

 

[usaf2006]

I'm pretty sure and Rc rear end is flipped already. Only the QC's require a flip kit
Look at blocks, different leaf spring packs and a c notch . Post up a picture of the rear end set up


Sent from my iPhone using Tapatalk

Srt trucks came flipped, but regular trucks, both reg cab and qc, had leaf over axle setups.

 

[TxMoparKid]

Yup, leaf over axle here. Got Calmax 3" arms for front, ordering McGs 6" deluxe rear. Forgot my leafs are warped (400tq, removed a leaf, sticky tires...not well thought out) and need new set. Any ideas on replacement leafs, stock, special, matter? 20yrs of dodge trucks, never had to buy leafs.

 

[Silver Bullet]

Srt trucks came flipped, but regular trucks, both reg cab and qc, had leaf over axle setups.

Thank you, I was just going off the srt trucks I have owned.
On my QC I went with a western chassis rear flip kit. It worked with no issues and I used there universal c notch kit.(weld in) both out the door for less than 200$


Sent from my iPhone using Tapatalk

 

[Silver Bullet]

Yup, leaf over axle here. Got Calmax 3" arms for front, ordering McGs 6" deluxe rear. Forgot my leafs are warped (400tq, removed a leaf, sticky tires...not well thought out) and need new set. Any ideas on replacement leafs, stock, special, matter? 20yrs of dodge trucks, never had to buy leafs.

I have an extra set of Srt QC leaf springs


Sent from my iPhone using Tapatalk

 

[Silver Bullet]

Woah woah woah... No details? That truck is sick. I'm digging the look of the roof rack on the low truck. So much going on, but tastefully done. Very nice truck..

Sorry for the late response

Michigan metal works
4" raised and offset upper control arm mounts
Mmw offset upper control arms w/poly bushings
Djm 3" drop lower control arms
Custom front 2" drop springs with a 1100 lb spring rate
Razors edge bump steer kit
Hotchkis front sway bar with polyurethane bushings
Front frame section was trimmed
Shortened sway bar links and mounts
Ride tech drop shocks

Rear end is from a Rc
JTSVP 2" drop blocks
Custom c notch w reinforced frame
Custom Rear end shock & mounts
Custom leaf spring pack with
polyurethane bushings
Carrier bearing crossmember raised 3"
Jmb performance traction clamps for leaf spring packs
Hotchkis rear sway bar flipped & spaced down with shortened links
Ride tech drop shocks
JLT super 60 drag bars



Sent from my iPhone using Tapatalk

 

[Redtruck-VA]

Haven't posted here for awhile. As always under construction.

 

[chrisp2493]

Looks awesome Greg!

 

[Redtruck-VA]

Thanks Chris, I haven't shown Red's bottom for awhile...

 

[Lethal Hemi]

5/9 drop on 22/24x15


Sent from my iPhone using Tapatalk

 

[Redtruck-VA]

Looks great!

 

[Demon-HeMi]

5/9 drop on 22/24x15


Sent from my iPhone using Tapatalk

that thing back on the road yet?

 

[Lethal Hemi]

that thing back on the road yet?

Nope I’m basically rebuilding this truck.
New 15k motor,
New Paint,
New suspension,
New fuel system
New wiring system with Holly EFI
New transmission that needs a lot of custom work done to it
So basically I’m close to 30k into this build and it won’t be done for another 4 month easily. I took time off from this truck during the holidays. I’ll start back up next week.
I’m ready to have her back but getting annoyed with all the money I have spent on her. It will be worth it at the end with a 750hp all motor truck cruising down the road.

Then I need to get rid of these 22s up front because I need more narrow wheels due to the suspension


Sent from my iPhone using Tapatalk