Demon-HeMi
Senior Member
- Joined
- Dec 30, 2010
- Posts
- 4,346
- Reaction score
- 3,300
- Location
- Houston
- Ram Year
- 2003, 2003, 2008, & 2013
- Engine
- (2) 5.7 HEMI, 3.7, & 3.6
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Are those the Street Scene's or something else? Is there anything that's bigger than those, but nicer looking than stock?
Are those the Street Scene's or something else? Is there anything that's bigger than those, but nicer looking than stock?
Nice so how much you want for the tow mirrors haha
Sent from my iPhone using Tapatalk
I assume those are what you refer to the stock ones as...?Nope either these or the mickey mouse ears
I assume those are what you refer to the stock ones as...?
Why do you have a hitch under your hitch lol
NICE! Given your outstanding success on the front bumper, I'm sure you'll kick this in the ass.
Want my opinion, though? Make it low profile, tubular, and warp-around with some built-in corner steps and a hitch. OR, better yet, make it like a raptor bumper and then run dual exit exhaust under the thin part close to the plate.
My plan is to have steps in it like the chevys and have dual exits out the back like a 4th gen!
Sent from my iPhone using Tapatalk
Gnarly. Cant wait to see this.
And the 35s on it. Lol. Guessing you need 20's, yeah?
I wish you were closer and I could get my 22's right now, cause I'd give you a deal on my petals.
Unless, of course you're actually after aftermarket rims instead like I am.
Sent from my magic 5-inch
My guess is you may have a class 4 receiver hitch there. My truck had a ball on the bumper which I pulled off. A class 3 receiver hitch mounts right below the bumper mount, which is what I have now. Usually a class 4 hitch will mount to the frame rails and the bumper mount.I have absolutely no idea.... came like that when I got it. Is it suppose to be like that?
Sent from my iPhone using Tapatalk
Hey welcome! I would say definitely get a diablo tuner and then a custom tune. I would pass on the throttle body, it’s gonna be more wasted money. Those are really only needed once you go BIG horsepower, the stock ones have been fine for most mods. And what performance parts are looking for? There a tons of stuff available, even for 2wd, just depending on your goals and budget
I Bleed Ram Trucks
View attachment 127721 I did the “get hit in the parking lot” mod today! Yay...
My guess is you may have a class 4 receiver hitch there. My truck had a ball on the bumper which I pulled off. A class 3 receiver hitch mounts right below the bumper mount, which is what I have now. Usually a class 4 hitch will mount to the frame rails and the bumper mount.
Sent from my XT1030 using Tapatalk