grubby65
Junior Member
- Joined
- Oct 13, 2016
- Posts
- 17
- Reaction score
- 8
- Ram Year
- 2016
- Engine
- 5.7 Hemi
I thought I would include some pictures and explanation of what I did to replace the Factory Alpine system in a 2018 Ram. Here are the components I used:
Dash Speakers JL C2-350X
Front Doors ScanSpeak 16W/4434G00
Rear Doors Dayton RS-150P
Headliner Tweeters Dayton RST28F
Sub Pioneer 10" (Dual Voice Coil)
DSP Rockford Fosgate DSR-1
Sub Amp JL JX500/1D
Speaker Amp JL XD600/6V2
The Rear door and Headliner Tweeter are running off a self designed passive crossover. My opinion is probably biased, but the system sounds incredible. The DSR-1, while a little bit of a pain to get setup and I had to add 500 ohm resistors to get it to power up, is very powerful tool. Probably has more adjust-ability then most people would need. The pictures of the amps isn't the greatest, I still need to get things organized.
Dash Speakers JL C2-350X
Front Doors ScanSpeak 16W/4434G00
Rear Doors Dayton RS-150P
Headliner Tweeters Dayton RST28F
Sub Pioneer 10" (Dual Voice Coil)
DSP Rockford Fosgate DSR-1
Sub Amp JL JX500/1D
Speaker Amp JL XD600/6V2
The Rear door and Headliner Tweeter are running off a self designed passive crossover. My opinion is probably biased, but the system sounds incredible. The DSR-1, while a little bit of a pain to get setup and I had to add 500 ohm resistors to get it to power up, is very powerful tool. Probably has more adjust-ability then most people would need. The pictures of the amps isn't the greatest, I still need to get things organized.