ross-demers
Junior Member
- Joined
- Jun 13, 2023
- Posts
- 4
- Reaction score
- 0
- Location
- prince rupert bc canada
- Ram Year
- 2006/2018
- Engine
- 5.7
has anyone done a swap from a 2018 or newer into a 3rd gen?
I have complete donor is half ton independent suspension, my 3rd gen is a 2006 2500 solid axle.
my question I have is will it run or just be in limp mode forever?
I have been hearing two different things
1) everything will be fine you can just go in and delete all sensors trans and engine can run independent.
2) it will be in limp mode need all sensors in axles.
I will be using all computers, wires and dash from 2018
I have complete donor is half ton independent suspension, my 3rd gen is a 2006 2500 solid axle.
my question I have is will it run or just be in limp mode forever?
I have been hearing two different things
1) everything will be fine you can just go in and delete all sensors trans and engine can run independent.
2) it will be in limp mode need all sensors in axles.
I will be using all computers, wires and dash from 2018
Last edited: