So after much frustration I figured out the issue which is harder to deal with than the fix. The Mirimoto 2 stroke 3.0 barely fit in the headlight EVEN WITH an extendable dust cover from headlight revolution. It’s so tight in the housing that when you go to move the light up the housing will eventually contact the back of the LED and pops the adjustment out of the socket and the projector drops. The ****** part is that my lights need to be pointing another 1” or so up. I figured this all out by putting it all back together with the extended housing just to attempt to raise them and popped the ball out of the socket for a second time. The 2stroke 3.0s have a large back housing on them.
Getting it back in is simple. the socket is attached to an extension. You just use the screw, back the whole thing out then tilt the light toward the back of the headlight and push the ball back into the socket. It takes some force, vasoline helped. I will be contacting headlight revolution as this should been caught before it’s advertised that the mirimotos fit with the extendable dust cover… very frustrated paid a lot for supposed best products for my set up…