MurderHemi
Senior Member
Where is the oil temp sensor located at for a 5.7 Hemi? I had a Hellcat bottom end swap done and the oil temp is not reading anything. Trying to track it down and see what the issue is.
Thank You
Thank You
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That must be it then. I bought the hellcat bottom end used then had it rebuilt. This shop missed many things I am now fixing so it wouldn’t surprise me if they just plugged that port and didn’t transfer my sensor over.Whatever bottom end they used may not of had it installed there will be a cap/plug you un screw then you can re install a new sensor if its not there cant tell from your picture.
I think the oil pressure sensor is mounted facing towards the front above the oil filter and the oil temp sensor is mounted above the filter and faces towards the pass side fender.It's tough to tell,but it looks like the sensor is there,but might not be compatiable with your truck if it's the hellcat sensor.You'd have to compare part numbers.That must be it then. I bought the hellcat bottom end used then had it rebuilt. This shop missed many things I am now fixing so it wouldn’t surprise me if they just plugged that port and didn’t transfer my sensor over.
I think the oil pressure sensor is mounted facing towards the front above the oil filter and the oil temp sensor is mounted above the filter and faces towards the pass side fender.It's tough to tell,but it looks like the sensor is there,but might not be compatiable with your truck if it's the hellcat sensor.You'd have to compare part numbers.
I think the plug you're looking at,is the block drain