Recent content by kylant

  1. K

    How To: 4 Ohm Resistor Upgrade For Aftermarket Dash Speakers

    would you suggest going with the 6.2 ohm from the get go? I am about to purchase new Kicker speakers for the doors and the dash. Thanks
  2. K

    Drag Link V06 Recall

    local dealer has it in stock. i'll go have a peek
  3. K

    Drag Link V06 Recall

    what is the part number for the "nuts" and where are they needed? I have been trying to order this new link for months to no avail. glad to see there is actually a cost effective way to get this thing thanks
  4. K

    Tire size change alfaOBD

    i must be missing something because my calculations don't work 593 revs per mile 5280 feet in a mile. 5280/593=8.9 feet per rev 8.9x12"=106.8" 106.8" per rev... now what?
  5. K

    Tire size change alfaOBD

    ok, pulled the trigger and got it done. was a little nerveracked at first. went with the measured height of 33.75" on the truck, 285/75-18. converted to a circumference of 2693. speedo was very close, I would say anywhere from 1/2-1mph fast. i went home and corrected to 2691. speedo was still...
  6. K

    Tire size change alfaOBD

    another question: my 285/75-18 listed size is 35.1" I have measured my tire height with the level on top of the tire method. Front tires measure 33.5", rear tires measure 33.75" which of the 2 measured heights should I convert to mm and use for the input? thanks
  7. K

    Tire size change alfaOBD

    is it necessary to update the tool? last time I used it, it worked fine
  8. K

    Tire size change alfaOBD

    quick questions: does alfa automatically update software? and do I need to update the firmware on my obdlink mx?
  9. K

    New 2018 Ram Alignment Issues

    camber is not adjustable on these trucks. sounds like your alignment shop doesn't know what they are doing
  10. K

    AlfaOBD

    i got it figured out. it appeared that the enable DRL setting under Program Customer Features did not take. I went back under Program Customer Features, Daytime Running Lamps, selected enable and then start. after that, I have the DRL setting under lighting on my screen
  11. K

    AlfaOBD

    the menu was actually named "custsetmenu 1 Daytime Running Lights CSM" I switched that to enabled/yes. That was the only tab that had "Daytime Running Lights CSM" in it. I looked through all the tabs. Is there another one? I just rechecked to see if I did indeed enable it, and it is. I looked...
  12. K

    AlfaOBD

    i got them all turned on, but the option to turn them off and on in the uconnect is not showing up. I have an '18 with 8.4N. I have looked in the lighting and safety/driving menus. I turned it on in the customer set menu 1-Daytime Running Lights CSM in alfa. is this what may take up to 24 hours...
  13. K

    AlfaOBD

    thanks. that helps. so first i need to enable them in program custom features. then go to car configuration change and go through each parameter.
  14. K

    AlfaOBD

    can somebody please post a step by step instruction template on how to enable drls for projector headlights please? the step by steps posted so far are confusing and don't quite match what I am seeing on alfa. seems like there are more steps than what has been posted. it looks like you have to...
  15. K

    Rear defrost

    I have an '18 3500 MegaCab Laramie. I have rear slider, but no rear defroster. I have the heated mirrors. Does anyone know if the wiring is at the rear of the truck for the defroster? I feel that I need the defroster for the climate I live in. If I can replace the glass and have the defroster...
See more

Latest posts

Members online

... and 13 more.
Total: 1,093 (members: 63, guests: 1,030)
Robots: 1,342

Forum statistics

Threads
196,070
Posts
2,877,392
Members
157,091
Latest member
Redfox

Share this page

Top