Search results

  1. J

    1998.5 Trying to wire factory fog lights, Can't find Jumper from Lights to harness. I have switch.

    So previous owner wired up fog lights but I want to set them up factory, I have a new Air Bag / Fog light combo switch. I believe i found the connector by the center of bottom of radiator , I need the jumper that connects from there to each fog light. I have not taken the dash bezel off yet but...
  2. J

    1998.5 24 V Looking for an Exhaust Brake/Engine Brake, Install and option questions.

    1998.5 24 V Looking for an Exhaust Brake/Engine Brake, Can you guys tell me what my options are, Are there different types? I am looking for one that looks well and hopefully installs fairly straight forward. Are they worth adding, Do some towing but have a lot of hill in our area. Thanks
  3. J

    FASS DDRP Lift Pump and relocation kit questions.

    Hi, I know the DDRP is not really a performance upgrade but it is new and came with the truck. It is mounted already but I plan to relocate it near the tank. The kit comes with 3/8 line, At what point do I want to go to 1/2 inch line? I am going 1/2 from Filter housing to Injection pump with...
  4. J

    1998.5 2500, Can I put Fog lights on their own switch? They come on with parking and low beam at the moment.

    Hi, Right now the fog lights come on as soon as parking lights are turned on Position 1, they will stay on when the low beams are turned on but turn off when the High beams are turned on. Am I able to separate them so i can control when they come on? I believe they are factory set up. Thanks
  5. J

    1998.5 2500 24 V can you guys recommend a rear Air Bag kit for towing/hauling?

    Hi, I am looking to add an air bag kit to the rear for when we are towing or hauling in the bed. What kits have you guys used and liked? I see the Firestone kit the instruction say to remover wheel well liner but it is not clear if I can put it back after the install which I like them in. Any...
  6. J

    Hi, I just picked my son up a 1998 2500 24 V Cummins, It has a level it appears ( and was told ) but it sits high about 1' over the rear. I am not loo

    Hi, I just picked my son up a 1998 2500 24 V Cummins, It has a level it appears ( and was told ) but it sits high about 1' over the rear. I am not looking to really keep raising the truck just want it leveled. Add A Leaf? If so which do you recommend and any how to links? 1' Block added if...
  7. J

    Hi, I have searched an searched, I have not found any threads really newer then 2020 and most were much older.

    Hi, I have searched an searched, I have not found any threads really newer then 2020 and most were much older. Is the Quadzilla Adrenaline still considered one of the best? I have no idea at this point how far we'll go with the truck but I would like to be able to expand if needed and have a...
  8. J

    Best 195 Deg Thermostat, No longer offered though Mopar.

    I want to flush my coolant and change my Thermostat, My truck has always maintained 195 Deg unless really pulling or hauling a load and then it doesn't go much above. Mopar only sells the 203 which I did try and my truck was running around 206 or more so i put the original one back in. I don't...
  9. J

    04 Hemi, Taylor Shorty wires 8.2 or 10.4 MM ? Thundervolt or? and Plugs 06 Conversion?

    Hi, I am getting ready to replace my Plugs ( almost 30 K on them ) and Wires ( about 10 Years old Mopar replacements ), I would not mind cleaning up the engine bay a little and I like how the shorty wires look. Now I have heard some people have issues and some do not with cold starting. I don't...
  10. J

    Header choices and fitment/Tune questions,04 5.7 Ram 1500 4WD SLT extended cab.

    Hi, I am looking for a direct fit Header choice for my 04 Ram SLT 1500 5.7 Hemi with Extended cab. I currently have Magnaflow Hi-Flo Cats and Y Pipe with Flowmaster cat back. So I am looking for a direct fit option, I had a Stock Manifold crack and I was able to find a new OEM unit which I...
  11. J

    What Upper A Arm should I get for 04 1500 4WD 5.7? Aluminum ? Steel? OEM or after market?

    Boots are starting to rip on my OEM Upper A Arm, I believe they are original, Should I replace with factory? I see prices are all over the place and some are Aluminum and some are steel, Some after markets list a left and right and OEM lists one part number for both sides. I am thinking OEM but...
  12. J

    Bilstein 4600 Front shock, I need the top rubber mount I can't seem to find them for this model shock.

    Hi, I am looking for the Top flat rubber mount/bushing that goes under the top shock I see them listed for other model shocks but not the 4600 24-069281, Can I use other brands? Bushings in this picture are what I need...
  13. J

    Eaton TrueTrac Oil, What are you guys running?

    Hi, I am going to be getting a TrueTrac in my Camaro, What oil do you guys recommend? I run Amsoil 75-90 now and have plenty on the shelf, I am getting mixed answer when searching. I run Torco RGO 85-140 In my Ram truck that has a TrueTrac in it. Should I run the Torco 80-90 In the Camaro...
  14. J

    OBD2 Scanner, Need help picking out a good all around option.

    Hi, I need to update my OBD2 Scanner, I am looking for a good all-around option that will allow me to Diagnose, Read/Clear Codes, ABS and Elec E Brake work and so on. I Would like to stay around or below the $200 Range and Don't really want the Bluetooth/Phone models. I would like to be able to...
  15. J

    04 1500 5.7 Ground strap location/Issues where do they go?

    Hi, I noticed that on my 02 1500 5.7 on the passenger side near the Cat/Manifold I have a broken ground strap that is bolted to a heat shield near the floor and it is broke, I can not see where it went to any ideas on this one? I also have a ground strap that is bolted to each valve cover...
  16. J

    Trailer Brake controller, How do I know if it is working?

    Hi, I have a Tekonsha unsure what model but I can check later today, It is just a basic slide controller, I hooked up a trailer that has Electric brakes but the controller didn't do anything no lights lit up on the controller even if I slide it manually. The trailer I used may not have working...
  17. J

    04 1500 E Brake replacment How to, Any tips for replacing the cables.

    Hi, I am going to be replacing the cables on my 04 1500 4WD, I want to rplace from inside the cab back so all of the cables. Any Tips? How do I adjust the cables when I am done? What about the shoes? Thanks
  18. J

    02 2500 Diesel, Front end upgrade recomendations.

    Hi, I am looking to freshen up the front end of a 02 2500 Diesel stock ride height, the truck is in very nice shape and has low mileage and have had it since new. I am looking to just freshen up the front end as it has some slop and clunks. I have heard of different kits and have heard about...
  19. J

    Torsion Bar bushing replacment on a 2004 1500? Have a few questions.

    Hi, I was just wondering how hard is it to replace the bushings, Do you replace just the bushings or the whole bar? Any links to suggested Parts? How do you know when it is time to replace? Any tips and help would be great. Thanks
  20. J

    04 Ram 1500, Looking for Rear Air Bag suggestions and thoughts.

    Hi, I am looking for Suggestions and thoughts of using Rear Air Bags in this truck. Truck is stock ride height with New Bushings and new Blistein shocks. I am looking to keep the rear from squatting to much if I am hauling ATV's or Snowmobiles in the box or the trailer. I also tow a travel...
  21. J

    Looking for Borescope recommendations.

    Hi, I am looking to purchase a Bore scope, I would like a unit that is complete, not looking to use my phone or other device. This is not something I will be using all the time so I would rather not spend a fortune but I am also not looking for junk. This is one of the ones I am looking at...
  22. J

    Sonnax line pressure booster worth it? Pro's Con's?

    Hi, I have a 04 Ram 4X4 Hemi, What do you guy's know about these? Are they worth it? Do they hurt the life of the tranny or do they help it? Does it change the way it shifts? Do I need to use the spring? I'd rather wait to add that part when I do the next fluid change if I need it. Thanks...
  23. J

    Black 04 Ram Bushwacker Pocket Fender flares, Paint to match or leave Flat Black?

    When I get around to putting bigger tires on my truck I think I may want to add fender flares at that time, I am not using them to cover any damage just want them for the look.. My truck is all black except for the chrome rims and nerf bars, Should I Leave the flares flat black or paint them...
  24. J

    Detailed Black truck using Chemical Guys Products.

    I ordered Chemicals guys Polish V32,34,36,38 Porter Cable DA CG assorted Pads 7 of them and their Backing Plate and I also ordered CG Black Light sealant and Black Wax. The paint on my truck I don't believe it to be original but I am unsure, I had light swirl/spider webs from normal wear and...
  25. J

    04 Ram, Help me choose between Hid and LED Headlight/Fog kit.

    Ok, I am pretty sure I am going to go with either LED or a Hid kit for both Head and Fog lights. I am looking at kits I think in the 4 to 6 K range with both Hi and Low beam. These are some listings I am thinking about but I am open to other brand and Kit suggestions. Pro's and Con's Please...

Latest posts

Members online

Total: 593 (members: 35, guests: 558)
Robots: 1,345

Forum statistics

Threads
195,699
Posts
2,873,432
Members
156,573
Latest member
Orca

Share this page

Top