Search results

  1. B

    Is the blower noise really normal

    It's more of a constant hum, light a slight rub of the motor internals. No squeal, squeak or any easy fix noises. It's more noticeable on lower to mid speeds as the higher speeds drown out the noise. With the Four Seasons I could actually feel the drag spots when I spun it by hand and that's...
  2. B

    Is the blower noise really normal

    Not sure how, the autozone VDO part number went to the same ever something that was the same label and part as the Four Seasons I already tried. Not sure if somebody put it in the wrong box but it was noisy as well. Oreilly's has a Murphy's brand I'll try in the morning.
  3. B

    Is the blower noise really normal

    I'm returning the Four Seasons blower and will try a VDO unit from the local parts store to see if that is any better. if not I'll return it and see if the dealer will let me try a new one.
  4. B

    Is the blower noise really normal

    is the blow noise that sounds like bearings/brush noise normal or not? Depending on the forum and thread I've read both. Months ago when i searched I found several cases where they took it back to the dealer and got a quiet one. I just bought one from the auto parts store and its noisier than...
  5. B

    Parts list for 2010 MyGig Lockpick setup

    I'm trying to figure out a current parts list to do an inexpensive decent camera setup in my 2010 CC Ram. For now I'm thinking a Lockpick V5 with just rear and front camera but if they aren't that much more possible adding some cameras to the sides somewhere. Due to me being a DA i might be...
  6. B

    True Street Performance- Hemituner Nag-Ram 1st ever

    Who makes the TCM for that trans? If the mechatronics are controlled with german programming like the BMW is then it might never be cracked. Certain model BMW's have been more than 8 years for somebody to step up and crack theirs.
  7. B

    True Street Performance- Hemituner Nag-Ram 1st ever

    What is the difference in electronics between the cars/suv's and the Truck? Why can't you just get the transmission, wiring, pcm etc and wire it up?
  8. B

    Shudder/Vibration when WOT downshifting

    132K on it. I've only had it a few thousand miles so not sure what the maintenance was. I knew I heard not to WOT from 5-4 but didn't know 3rd was an issue also. Is this a 4th gen issue? I never had any problems in my 07. Is this a programming issue or hardware issue? If there's hardware upgrade...
  9. B

    Shudder/Vibration when WOT downshifting

    I know I've heard somebody mention this but just happened to me a little while ago on the highway. I floored it at 60mph and went from 5th to 3rd and it wasn't happy. Kinda seemed like the clutches were slipping a little or something. I've got a 2010 2wd 1500 5.7 with HemiFever tune, Sonax line...
  10. B

    Fuel additives and cleaners?

    It really depends. Seafoam can work wonders on outboard boat engines. Most of the engines I've seen that needed a good cleaning are owned by people that don't maintain their vehicle and wouldn't even consider some of these products. The best thing to do if your really that concerned with it...
  11. B

    Differences between Jay Green and Hemifever

    A Dyno is definitely a tuning tool, but it can also be more than that. While I agree Dyno's are not created equal and internet comparing is overall useless a Dynojet isn't the worst internet comparison tool available. Anybody comparing tunes should definitely hit the dyno to see the difference...
  12. B

    Differences between Jay Green and Hemifever

    Does nobody put their trucks on a Dyno around here?
  13. B

    OBX headers installed

    I tried defoulers on my 07 as a cheap option and couldn't get rid of the check engine. It did delay how soon it turned on but always came back on. I even tried the steel wool around the sensor trick.
  14. B

    What do you guys think about this engine build?

    Guess that's my point the SRT 6.4 already outflows ported 5.7 setup I see it being difficult for an SRT setup to push that kind of torque let alone a truck setup. Race fuel maybe but see that being a little much for pump. I'm game to see the dyno when it's done though.
  15. B

    What do you guys think about this engine build?

    Sorry I'm not understanding how the 500 ft lb or torque is coming into here. a SRT 6.4 is 470, a truck 6.4 is 429. Even if you stroked a SRT 6.4 to 6.6 I don't see 500 happening.
  16. B

    Cam and heads

    Ok so it's like original VVT engine where it's not infinitely variable it's just more like on/off moving from min to max settings? Typical older engines one turn on for the mid RPM range and then turn back off at higher RPM's.
  17. B

    Cam and heads

    I understand what the limiter is/does just seems like something that should be able to be done in the software. I could see a hardware limiter as a safety measure but any upgraded cam should really have the VVT settings updated in the tune.
  18. B

    What brand ring and pinion?

    Update: Dorman was a bad gear choice. Couldn't get rid of the whine, the shop tried different pinion depths and backlashes so they swapped out everything. The went with new bearings and went with a G2 ring and pinion that they like over Motive. Quiet as can factory now. They also noted that...
  19. B

    Cam and heads

    Whats the need for the VVT phaser locked or limited? Hardware issue or because it can't be properly limited/corrected in the software? Sorry used to other platforms where you have full access to VVT tables and settings.
  20. B

    What brand ring and pinion?

    I picked up a Dorman 4.10 from RockAuto for $138 with a discount code. Not sure what happened as it showed 3 different prices over the few days I looked at it. Anyway not sick with some bug and then impatient so dropped it off at a local Jeep/Offroad shop that has a reputation for being very...
  21. B

    Is a change in tune required after regear?

    That's pretty cool. Wish other platforms would have done it that way.
  22. B

    Is a change in tune required after regear?

    Swapped from 3.55 to 4.10 and was expecting the PCM needed to know about it but it seems that the speedo is already correct. I was expecting to go digging through the intune for settings to adjust.
  23. B

    Eco diesel reliability

    Yeah the dealer should have stepped up to assist. I'm surprised you bought another truck especially from them, unless it needed customized for the job. You can rent 1500's in most areas, there's even the small commercial rental places that have trucks, flatbeds and boxtrucks. I've known people...
  24. B

    Who's running lth's with 1 7/8 on 3.55s?

    ok so no way to lock in a certain gear on the dyno yet? I know I've expressed disappointment with the tuning options on this platform but why wasn't anybody figured out a software or hardware based option of locking a certain gear? I know it's not the most optimal but maybe trying 1st gear on a...
  25. B

    aero turbine

    I had a 3030XL and OBX Headers on my 07 5.7. I thought it sounded decent enough, a little louder than I wanted but not as loud as plenty of others around.

Latest posts

Members online

Total: 401 (members: 9, guests: 392)
Robots: 1,362

Forum statistics

Threads
195,697
Posts
2,873,409
Members
156,573
Latest member
Orca

Share this page

Top