Search results

  1. hemiexp04

    Active grille shutters

    Hit a deer and looking for the whole assembly minus the motor. How much?
  2. hemiexp04

    New personal best

    That ecoboost is tuned by ssi. Also known for tuning shit to the very edge of blowing up. Was in a really good da, launching in 4wd , and only weighed 4600lbs. Best time was a 12.6 other times were around 12.9
  3. hemiexp04

    4th gen obx headers *pics*

    Those aren't actual real cats. More like resonators.
  4. hemiexp04

    4th gen obx headers *pics*

    I contacted obx last week to get some more details and pics of their 4th gen longtubes. Of course they are arh knockoffs , 1 7/8 , 3in ypipe. They are 599 for the 8 speed trucks and I'm pretty sure same for 6 speeds. Say they will fit 4x4 trucks. Does not come with 02 extenders . They offer them...
  5. hemiexp04

    FINALLY! 2.5 level, rt 22s, fuel mud gripper 35 12.50 22s

    Thanks. Still trying to get some pics on level surface. Tires were $350 a piece. Still cheaper than toyo or nitto
  6. hemiexp04

    FINALLY! 2.5 level, rt 22s, fuel mud gripper 35 12.50 22s

    I'm guessing because of the 2wd springs? It's not as bad as the pictures make it out to be.
  7. hemiexp04

    FINALLY! 2.5 level, rt 22s, fuel mud gripper 35 12.50 22s

    Lol these pictures make it look like it is squaring horribly. It's not trust me . I guess it's just the slop of my yard. It has a small amount of rake but these do make it look terrible. I'll try to get some on level ground today. Also it may have more rake than most leveled 4x4s because I have...
  8. hemiexp04

    FINALLY! 2.5 level, rt 22s, fuel mud gripper 35 12.50 22s

    Finally got my truck finished today. 2.5 level and 35 12.50s on rt 22s. No rubing at all. About 3/8s between tore and a arms. Absolutely love it. Tires are super quiet too.
  9. hemiexp04

    Throttle body spacer - v6

    This is why ram owners get shit talked about. Why don't you actually do something that's going to help lIke get a tune. Not going to bash you for having a v6 truck everyone has their reasons. These new v6s make more power than the old 4.7s.
  10. hemiexp04

    fuel mud gripper m/ts ?

    Just wondering has anyone used these. The old design was a knock off toyo. Haven't really seen anyone with the new design yet. They look pretty good. Ordered some 35 12.50 22s. Going on my 2014 ram with 22in rt wheels and 2.5 leveling kit. Hopefully have everything done this week.
  11. hemiexp04

    few questions about 35s rubbing, wheel spacers etc.

    Thanks guys. I ordered 1/4 spacers just in case they rub. I've yet to see a ram leveled with rt wheels. pretty excited to see how it turns out. The tires I'm getting are atturo m/ts . Not sure if they are true to the 35/12.50 size
  12. hemiexp04

    few questions about 35s rubbing, wheel spacers etc.

    Ok guys truck is a 2014 sport quad cab 4x4. I put rt wheels (22s) and lowered my truck a while back. Now I'm going a different route and gonna put stock springs and leveling kit on and either get 33 12.50 22 or 35 12.50 22. Now question is are the rt wheels got a different offset than regular...
  13. hemiexp04

    anyone leveled on rt wheels ??

    I meant rt wheels not srt lol but its ok
  14. hemiexp04

    anyone leveled on rt wheels ??

    Looking for a pic of a truck lifted or leveled on some rt wheels to get an idea of what it may look like. Was thinking some 33 12.50 22s
  15. hemiexp04

    This is going to be fun...

    Oh no doubt someone's got to try it. I'm glad that we are finally getting some aftermarket help. Trust me if we had all this back in 2010/2011 when I had my rcsb it would been on. Years ago we had absolutely none. Are the heads stock castings and just ported or what?
  16. hemiexp04

    This is going to be fun...

    I couldn't see how you could justify the amount of money for a heads/cam combo for these trucks if you can't see gains 60rwhp. I know we're not talking ls motors here but I would be pretty disappointed. Givin your truck isn't a dd I'm sure it's going to be a pretty aggressive setup. I could see...
  17. hemiexp04

    This is going to be fun...

    If you can't break 11s in a decent da with a heads/cam, every bolt on imaginable in a stripped down truck something is wrong just saying.
  18. hemiexp04

    gave the ram a break and took the other car to the track

    What all mods did you have? Plan on getting a tune from unleashed, 3 bar map, methanol , and some sort of exhaust setup. Don't want it too loud. I actually did the blow off valve mod so you can hear em she loves it lol. Always building boost and letting off to hear it.
  19. hemiexp04

    gave the ram a break and took the other car to the track

    Thanks guys. I was suprised it ran so well in that heat. Let it cool down for a long time but it took over and hour in staging lanes so it was heat soaked alot. Yeah deff next time car will be empy. Buddy's were drinking all night lol. Enjoy driving it they really are nice cars. Have more...
  20. hemiexp04

    gave the ram a break and took the other car to the track

    Alot of us on here dont talk about our other cars at home Decided to give the ram a break since I haven't gotten my nitrous setup finished. We have a 2012 ford taurus sho awd ecoboost (I know guys give me a break lol ) it's the old lady's dd and I've been wanting to mod it but obviously my truck...
  21. hemiexp04

    4th Gen Official Timeslip/Discussion Thread

    I cut 1.9 60fts in my quad cab 4x4. You launching in 4wd?
  22. hemiexp04

    actual safe rev limit?

    Just wondering what is the actual safe rev limit before something breaks in our trucks? I know the usable rpm rage just want to know just by accident if you were to over rev it what is the max? Just asking because I've done it a few times and tonight I was just doing some digs practicing 4x4 and...
  23. hemiexp04

    for those of you 4x4 guys wanting to cut springs

    Gonna jack it up this weekend and take a look. Its not bad until you hit bad bumps or go over a bridge. It seems to bounce alot.
  24. hemiexp04

    392 SRT8 Crate engine?

    It's a pretty stright forward swap. A member on here did it a few years ago. The exterior of both engines are almost the same. Swap oil pans and accessories and pretty much done. He used the truck intake so Noone would know he did a motor swap and I believe he made line 420 rwhp with pretty much...
  25. hemiexp04

    for those of you 4x4 guys wanting to cut springs

    Yes lots of play that's what scared me. From factory the springs barley need to be compressed to break it down. After cutting it slides up and down the shock, you can move it alot and turn it anything. When I went to install it I aligned the bottom of the spring to the the correct position on...

Latest posts

Members online

Total: 835 (members: 50, guests: 785)
Robots: 1,666

Forum statistics

Threads
195,653
Posts
2,872,954
Members
156,496
Latest member
DannyDang78

Share this page

Top