Search results

  1. Darkflow

    Experiencing a rattle type sound...

    Like the title says, i have some type of rattling sound happening. It sounds as if its coming from the dash on the passenger side. I can't seem to figure out what it could be.... anyone else ever have this issue? Its freaking annoying as hell.
  2. Darkflow

    Installed LED's, 1 giving error message

    So i installed LED's in the front turn signals and tail lights. Along with resistors. Everything worked great, got the truck cleaned up using Fukken Wax. I took a cruise for a bit then on the way home. Took a left turn and noticed im having hyperblinking. Checked the message on the dash, turns...
  3. Darkflow

    Hard knock on turns?

    Im having this weird issue where if i make a good hard turn. I get a hard knock sound...like pulling into the apartment parking lot. The little dip that most have. When i hit it kind of quickly i get the knock, if i go in slowly i dont hear it. Ive only noticed it since i installed the hellwig...
  4. Darkflow

    belt/pulley swap

    So my belt & or pulley/tensioner are squealing. I got a new belt, pulley & tensioner. I said F it, I'll go ahead and change them all out. Now the dumb question is, What do I use to get the tensioner to move and get the belt out 1st? Unless I'm being stupid but I tried a ratchet on the bolt and...
  5. Darkflow

    Parts for a 2500 front bumper swap?

    Does anyone here know where to find the filler bumper pieces that go underneath the headlights on the 2500 Ram's? 2500 Ram guys, is this 1 big piece or 2 pieces? I know the bumper brackets are different and will have to be welded on. Everything else works from what ive seen over on another...
  6. Darkflow

    JBA Y-Pipes coming soon..

    They recently posted on Facebook about having plenty of longtube headers in stock for the 09+ Rams. I commented with "you guys need to make some Y-Pipes". Well this was the response I got from them.... Just thought I would share the information for you guys who may not have a Facebook or have...
  7. Darkflow

    Circle D Converters

    I was looking on their website and saw that they have 2 options for the 2600-3000 stall. 1 with the billet front cover and the other without. $100 difference between them. My question would be, should I go with the billet one or save that $100 towards another mod?
  8. Darkflow

    Bed covers

    To those of you who have one, Where did you buy it from? And which is it? Some pics would be great. I've been searching ebay and found a couple but hoping I can get some reviews from you guys before I decide to pull the trigger and buy one.
  9. Darkflow

    Windshield washer not working?

    As the title says, my windshield washer isn't working. I push the button in to start it and all I get is the wipers going back and forth, but no washer fluid sprays out to clean the windshield. Anyone else had this problem before? Could it be just the motor used to run this or maybe clogged...
  10. Darkflow

    Any idea how much this drop is?

    I spotted this single cab the other night while in the drive thru. 1st thoughts were "gotdamn that thing is low in the front lol". Mines a 3/5 and nowhere near being that low. I do like it though.
  11. Darkflow

    Removing wheels?

    I'm trying to remove my rear wheels but I cannot get them off. Is there something holding them on besides the 5 lug nuts?
  12. Darkflow

    Step side bolts/hardware

    So my truck used to have a set of chrome step sides on when I bought it. I removed them but could never get the bolts/hardware out..... So my question is, where do you buy the hardware to install them on another truck? My buddy is wanting to buy them from me to put on his wife's truck. I'm...
  13. Darkflow

    Thinking of upgrading to 4.10's

    Ive got the 3.55's right now and thinking of going with the 4.10's. Ive never done this before so my question is, what all do I need to buy? Also how much will my mpg change? I do travel on the highway a lot. Just curious as to what kind of hit my mpg will take.
  14. Darkflow

    What HU, Components & Amps?

    Looking for some recommendations on, 1. Head Unit 2. Component speakers 3. Amps I don't really know what Amp(s) to go with or what good component speakers to run. Subs, ill be going with Fi Car Audio or Sun Down. Any help guys, I would really appreciate it. I don't really know much when...
  15. Darkflow

    HID Foglight issue!

    Driver side fog light is giving me problems. It either turns on or it doesn't, when it doesn't I can just push the button on and off for a while till it'll finally light up. This was a kit I bought from RetroShop but my harness ended up with a short in the power wire. So I went the cheap way...
  16. Darkflow

    What Sub enclosure?

    Where are you guy's buying your subwoofer enclosure's? I'm looking to install only 1, 10" or 12" subwoofer. Only enclosure's I have found are from ebay. I'm just curious if you guy's don't happen to be buying from any particular place online? Unless im not searching right but I don't...
  17. Darkflow

    step sides hardware removal?

    I removed the side steps that came on my truck a few months ago. I decided I want to try and sell them but I'm curious as to how I can remove the hardware? The backing plate, bolt and nut? All I did was just re tighten it all down. So the hardware is still there bolted on to the truck.
  18. Darkflow

    McGaughys 2/4 drop, whats all included?

    So I bought the McGaughys 2/4 economy drop. Arrived last week, finally opened it up yesterday and noticed all I have is... Springs Bump stops Relocation bracket? (I forget what its called) Bolts I thought the sway bar end links came with it? Or is this all I need? Just asking because I...
  19. Darkflow

    For those lowered with helper bags..

    Where are you guys buying the helper bags? I know a lot of you guys have mentioned that we need these in order to still be able to tow and i need to be able to tow my car around when needed. I already have a lowering kit on the way and i would like to get these bags to do the install all at...
  20. Darkflow

    PCM Part# & Gear's question?

    Im ready to order the DiabloSport Trinity from HemiFever. So my questions are, 1. How do i tell what gear's my truck has? 2. Is the PCM Part# start with a P? There's nothing on the box but there is a tag on a set of wires next to it. Im guessing that would probably be it.
  21. Darkflow

    Painting engine bay/calipers..

    I plan on painting my engine cover and brake calipers and i began thinking, has anyone painted the radiator cover? If so, what paint was used? I realize it gets hot so my thoughts were maybe the caliper paint since they are rated for 900% heat or VHT's header coating. I wanted to try and...
  22. Darkflow

    new upgrades with pics

    Just thought I would post pics of the progress I've made with the truck so far. Newly added mods... 22" Black with Machine faced SRT10 wheels. 305/40/22 tires Black fender hash stripes (ordered another set. I should've put a bigger gap between the stripes. I didn't think of that till...
  23. Darkflow

    Fogs not working.

    The foglights havent worked since i got the truck back in Oct. 2012. I thought maybe the bulbs were out or something. So i didnt think to much of it, well I just installed the HID's today and they still dont work. What could be the problem?
  24. Darkflow

    Question about longtube headers

    Besides American Racing, what other brand header's are out there for 09+ Hemi Rams? Im getting that itchy mod bug feeling lol. Its all thanks to a 09+ Dodge Ram that passed by work the other day. It was lowered with a mean/loud exhaust system. I couldnt help but stare at it, as it drove by...
  25. Darkflow

    DiabloSport Trinity Tuner?

    Who's using this tuner? Or does anyone have any kind of info on it? Thinking about buying this from HemiFever and getting a custom tune from him. Im pretty much done with performance mods for the time being as im trying to get my Camaro back up and running. I see a few people having issues...

Latest posts

Members online

... and 128 more.
Total: 1,929 (members: 178, guests: 1,751)
Robots: 1,760

Forum statistics

Threads
195,706
Posts
2,873,560
Members
156,587
Latest member
rtracy

Share this page

Top