STOUTE
Senior Member
- Joined
- May 21, 2010
- Posts
- 116
- Reaction score
- 19
- Location
- Port barre,louisiana
- Ram Year
- 2009/2003
- Engine
- 5.7/4.7
NOTE: Truck is a 03 1500 2wd 23k miles 4.7 auto trans
Ok I still can not get my driver side head light to work on low beam. It just cuts on and off a few times and then nothing. I'm Not running hids,or non factory bulbs . I had it checked out and the voltage going to it spikes a few times then no volts. Like the computer is doing it and I have all ready changed my headlights switch.
Now my volt meter under a load and not under a load. Just goes to 0 and a few seconds later goes back up.
And now my cruise control does not work. The light comes on just will not set.
Ok I still can not get my driver side head light to work on low beam. It just cuts on and off a few times and then nothing. I'm Not running hids,or non factory bulbs . I had it checked out and the voltage going to it spikes a few times then no volts. Like the computer is doing it and I have all ready changed my headlights switch.
Now my volt meter under a load and not under a load. Just goes to 0 and a few seconds later goes back up.
And now my cruise control does not work. The light comes on just will not set.
