rickarcher
Junior Member
- Joined
- Jul 6, 2015
- Posts
- 1
- Reaction score
- 0
- Ram Year
- 1997
- Engine
- 5.9l V8 Magnum
I have a 1997 Dodge Ram 1500 5.9 Laramie SLT that will start and run, idles around
1000, but when i accelerate it stumbles... i can slowly apply gas and get to 4000 rpms no
further, but if i push it, then it drops off down to almost zero...if i let off the gas
completely it will recover....if i push the gas to the floor it will stall out...i cleaned the
throttle body and replaced the IAC and TPS...doing that improved it from zero rpms to where i am at now...what should i be looking at?
1000, but when i accelerate it stumbles... i can slowly apply gas and get to 4000 rpms no
further, but if i push it, then it drops off down to almost zero...if i let off the gas
completely it will recover....if i push the gas to the floor it will stall out...i cleaned the
throttle body and replaced the IAC and TPS...doing that improved it from zero rpms to where i am at now...what should i be looking at?