cwhite7
Junior Member
Hello, wanted to see if there’s anything I’m missing. My 2010 Dodge Ram 1500 Laramie has 200k. The AC had a small leak and it was coming from the compressor. I did some major rehab because of other issues. Things I replaced:
AC Compressor and orings
Expansion valve and o rings
Drier filter and o rings
Replaced high and low side schrader valves
Cleaned evaporator, no cab filter
Replaced blower motor, old one was loud
Replaced blend door for temp control, old one went out
I vacuumed out ac lines and tested for leak, no leak.
Ran vacuum for an hour, sealed and then filled with 26 oz of Freon.
I feel like the air isn’t very cold and doesn’t blow super hard.
Am I missing something? Anything I can troubleshoot?
Thank you for any help!
AC Compressor and orings
Expansion valve and o rings
Drier filter and o rings
Replaced high and low side schrader valves
Cleaned evaporator, no cab filter
Replaced blower motor, old one was loud
Replaced blend door for temp control, old one went out
I vacuumed out ac lines and tested for leak, no leak.
Ran vacuum for an hour, sealed and then filled with 26 oz of Freon.
I feel like the air isn’t very cold and doesn’t blow super hard.
Am I missing something? Anything I can troubleshoot?
Thank you for any help!