2012 Ram 1500 Stereo Wiring Help Needed

[NYDocinTX]

I am working on a stereo install for a 2012 Ram 1500. The stock stereo had 3 connectors, 2-22 pin and a 10 pin going into the stereo. It appears as though it was a C1, C2, and C3. I have found the schematics online but the wire colors don't fully match up. I am trying to determine what wires would go to the reverse input +12v, illumination input +12v, rear camera power +12v, accessory +12v, and swc input. I have included pictures of the 3 connectors i the truck and their wires. Any help would be greatly appreciated.

 

[tron67j]

Read through the how to install 4c radio thread in the 4th gen forum, lots of wiring discussion there. Also, depending on the radio you are installing you may need a wiring harness. M²Mods in vendor section builds them and can help you after purchase with install questions.

Good luck.