2012 ram 2500 5.7 pcm plug diagrams

[bhill115]

Hi, I'm new here. I am looking for a wiring diagram on the plugs for my PCM on my 2012 Ram 2500 5.7. Someone spliced my automatic transmission pressure sensor wire too short and I would like to run new wires up to the right connector pin where it plugs into the pcm. I cant seem to find a diagram of what the 4 plugs each are for. Any help would be appreciated. Thank you. Photo for reference

 

[jawzs2]

This site should should have what you need. It looks like they have the engine wrong for the gas engine, they show a 3.7L, not 5.7L, but I think that's a typo.

https://connectorrepairkit.mopar.com/

 

[bhill115]

Thank you much appreciated

 

[bhill115]

I'm sorry for the dumb question. Once I look up the plug on the site mentioned above it is the green plug for the wiring I need. How do I know what pin to look for on the plug I see there is 38 pins on the plug. I see under circuit T1 through z908 listed but no actual pin location numbers. I apologize as I'm new to wiring schematics.
Im looking for pins for the three wires on my trans pressure switch wiring. There are 3 wires yellow and pink, yellow and green, and a solid blue

 

[jawzs2]

Not a dumb question, i see what you mean, it doesn't show the cavity numbers. I checked 2011 and 2010, they don't have it on those either, 2009 does, but i wouldn't go by that, it doesn't look close - strange.