2013-2018 Ram Auxiliary Switch Relay Connectors

[tnctx02]

I am looking for the male and female connectors for the auxiliary switch panel.
No one has the complete kit to purchase so I am going to make my own but I need the 2 connectors to make it work.
I got a waterproof fuse/relay box on the way and have the auxiliary switch panel here now.
Anyone know where to purchase them?
Thanks in advance for any help!

 

[BlackGold6.4]

How to wire and configure the AUX switches in a 2019+ Ram pickup

If your 2019/2020 Ram truck has AUX switches, this video will show you how to use the wiring kit that comes with the truck and how to configure the AUX switc...

youtu.be

Check this out.. I've been researching this and found this video. I found some videos from Ram too that may help. I'll find them and post them for you.

 

[BlackGold6.4]

Auxiliary Switches and Upfitter Wiring | Ram Engineering | Ram Trucks

DescriptionRam Trucks engineer Chris Borczon discusses auxiliary switches in Ram pickup trucks and chassis cabs, focusing specifically on how auxiliary switc...

youtu.be

 

[BlackGold6.4]

Hope this helps, there are other videos that can lead to possibly finding out more from the 2 posted.. good luck .. and Merry Christmas

 

[tnctx02]

Hope this helps, there are other videos that can lead to possibly finding out more from the 2 posted.. good luck .. and Merry Christmas

Those have great stuff.
I am looking for a source for the connectors by themselves to make my own harness for the 1500.
The uPfitter fits the 2500 and up from all my research. I know my truck doesn't have the underhood relays that the videos show.

 

[BlackGold6.4]

Oh bummers, you'd be right on that. Have you looked on TRX forum.. these guys may be able to help ..

What Did You Do With Your TRX (or Other Ram) Today?

here is a hint of the next mod i’m working on

www.trx-forum.com

 

[tnctx02]

I am sure someone on here knows where to purchase factory connectors to be wired when creating a new wiring harness.
I have a new relay/fuse block wired up waiting to be installed. All I need is the male and female connectors for the auxiliary switch panel to to it.
Can someone help me out?
Thanks for any help guys.

 

[tnctx02]

These are the male and female connectors I am looking for.
Anyone know where I might be able to get them?
Any help will be greatly appreciated.