2013 2wd 7"maxtrac 3" body (want bigger tires)

[dodginaround]

I have 37x13.50 with stock 20s now. Anyone know if I would be able to go 38s with a 20x12 or x14 with no problem? I'm not sure what will be effected by putting a deeper wheel

 

[Wandell]

I don't think you will fit 38's with a wheel that wide. Wheel width and backspacing are as important to fitment as lift height and tire size.

 

[SATXram2013]

Im running the same lift on 20x12 moto metals with 35" tires. Without the body lift they rubbed to bad to even do some trimming and call it good. I would be worried about 37" tires on my rims let alone 38's

 

[yodge]

What gears do you have ?


Sent from my iPhone using Tapatalk

 

[Diminus]

Not gonna work bud

 

[dodginaround]

Stock 3.55s

 

[yodge]

Stock 3.55s

Isn't that too sluggish? I had 37's for a few months and got rid of them and that was 17" rim on 12.5 wide


Sent from my iPhone using Tapatalk

 

[dodginaround]

Doesn't seem very sluggish to me at all. I went straight to 37s from the stock 275/65s and couldn't tell a noticeable difference lol could just be the way I drive

 

[yodge]

Doesn't seem very sluggish to me at all. I went straight to 37s from the stock 275/65s and couldn't tell a noticeable difference lol could just be the way I drive

Could be that. I went from stock to 33" all terrains to 37" mud terrains then down to 35" mud terrain and that's where I'm at now. Still beat all the Chevys and fords my friends own with my bully dog of course


Sent from my iPhone using Tapatalk

 

[dodginaround]

What did that bully dog run you? Easy installation? And what all did it do for you

 

[yodge]

I bought it off a member on this forum actually for a great price $275
I just have it set to the 89 octane tune and imputed my 35" tire size. I changed my top speed limit. I didn't do anything custom like change shift points or anything because I don't want to do anything that could harm the transmission. This is my first tune.


Sent from my iPhone using Tapatalk