Sporty Blue RAM
Junior Member
Recently I installed a set of Bull Bars on the front bumper of my 2015 RAM 1500 Sport. Due to the location of 2 of the sensors in the front bumper it was setting off the front park sense, so I turned that off at the dash. Since turning that one off the rear park sense works as far as the tone, but the distance indicator on the dash doesn't come up showing how close I'm getting to item behind me.
I have the AlfaObd2 program and the OBD2 connector where I can program things via the program. So wanted to know if anybody knows how to deactivate the sensors near the bars or if there's an item in the AlfaObd2 program that will help reprogram the fronts so the rear will go back to working properly.
I have the AlfaObd2 program and the OBD2 connector where I can program things via the program. So wanted to know if anybody knows how to deactivate the sensors near the bars or if there's an item in the AlfaObd2 program that will help reprogram the fronts so the rear will go back to working properly.