Finally found something for the 2013 & 2014.....not exactly as simple.
"The DBALL Key2Go Firmware flashing process is a 2-stage process and must be done at the vehicle. (Previously, for the 2006-2012 Dodge RAM vehicles, the DBALL could be flashed ahead of time with the 401.chrysler v5.06 firmware and then the DBALL just needed to be plugging into the vehicle. This procedure no longer works on the 2013 / 2014 Dodge RAM vehicles because Chrysler made significant changes to the electronics on the 2013 vehicles. Therefore to accomplish DBALL remote starting with your factory remotes, the DBALL now needs to be flashed / programmed at the vehicle, rather than ahead of time.) An XKLoader2 Gen2 Programming Tool (Flashtool) will be needed with access to a Computer to do the DBALL flashing. An Authorized Directed Dealer Login is also needed for the Key2Go programming access. We provide you with the temporary Key2Go programming access that is needed along with your order for this package.
Please Note: In addition to the significant changes Chrysler made in the electronics for the 2013 model year, they also changed the Dodge ignition node wiring plug from the previous 12-pin plug that fit the CHTHD1 T-Harness, to a new 6-pin ignition node plug. The new 6-pin THCHD3 T-Harness developed by Directed for the 2013 / 2014 Dodge RAM vehicles and is now included with this Kit."
Plug N Play Remote Start Kit for 2013 2014 Dodge RAM DBALL2 THCHD3 T Harness | eBay
Directed Xpresskit XKLOADER2 Gen 2 Flash Programming Tool USB XK Loader DB All | eBay