jojo750
Senior Member
installed MOE's 85mm ported throttle body today. took about 10min to install. my truck is a 2011 big horn, quad cab with 5.7hemi. 18k miles...
here is my short write up on installation.
removed negative terminal to battery.
removed my vararam to get access to throttle body.
immediately noticed the buildup on inside of throttle body. you can see where i swiped my finger across the middle.
unplug wire harness to throttle body.
remove 4 bolts that connect throttle body (8mm).
remove throttle body.
compare stock vs. 85mm. notice buildup on bottom of the throttle body!!
install MOE's 85mm throttle body. reinstall 4 bolts ***(BE CAREFUL TO NOT OVERTIGHTEN THOSE BOLTS!!! they are screwing into plastic, and can strip farely easily.) reconnect wire harness to throttle body.
reinstall vararam and reconnect negative terminal to battery.
here is my short write up on installation.
removed negative terminal to battery.
removed my vararam to get access to throttle body.
immediately noticed the buildup on inside of throttle body. you can see where i swiped my finger across the middle.
unplug wire harness to throttle body.
remove 4 bolts that connect throttle body (8mm).
remove throttle body.
compare stock vs. 85mm. notice buildup on bottom of the throttle body!!
install MOE's 85mm throttle body. reinstall 4 bolts ***(BE CAREFUL TO NOT OVERTIGHTEN THOSE BOLTS!!! they are screwing into plastic, and can strip farely easily.) reconnect wire harness to throttle body.
reinstall vararam and reconnect negative terminal to battery.