bassheadhemi
Senior Member
- Joined
- Apr 18, 2015
- Posts
- 1,031
- Reaction score
- 411
- Location
- Montreal, Canada
- Ram Year
- 2015
- Engine
- Hemi 5.7
Ok so I was having an issue with my shutter stuck close on the truck(3rd time). Dealer after clearing the code said everything was fine... I understand how they work and my time is more valuable than arguing with them so I decided to try this
[yt]1ZP1GkfDMFI[/yt]
But after looking at how the assembly actually worked I decided to try something else. I drilled a hole and use a desk screw as the stopper. With the screw in this location the lever stop at the same position when it's operating the shutter.
So far no CEL after a 25 miles run, but I'll give it a few days before calling it success.
[yt]1ZP1GkfDMFI[/yt]
But after looking at how the assembly actually worked I decided to try something else. I drilled a hole and use a desk screw as the stopper. With the screw in this location the lever stop at the same position when it's operating the shutter.
So far no CEL after a 25 miles run, but I'll give it a few days before calling it success.