Hoeoperator320
Junior Member
- Joined
- Sep 1, 2015
- Posts
- 8
- Reaction score
- 0
- Ram Year
- 2012
- Engine
- 5.7 hemi
I have a 2012 RAM 1500 bighorn that was hit in the front corner. The airbags went off. Im working on replacing the dash/passenger side airbag however the connectors for the airbags melted when they went off. Apparently this is common. My question is can I splice in new plugs or does the whole harness need to be replaced. I've read both opinions online. I have some good plugs on another partial harness I could soldier in but I read that it will effect the circuit resistance and cause problems. Anyone have experience dealing with this?