Nealuss
Senior Member
- Joined
- Mar 8, 2016
- Posts
- 137
- Reaction score
- 33
- Ram Year
- 1994
- Engine
- 5.2L 318
So a few months back I installed the DJM 2" coils and 4" hanger and shackle kit with a set of Nitro Drop 2's. I figured I would start there and I can always go lower if I want to. Well now I want to go lower lol. It's a big improvement over stock but it needs another couple inches. It also kinda ticks me off when the Chevy guys are lower than us Dodge guys with nothing more than a set of shackles.
Anywho... I know I can get drop spindles for the front for another 2" but what is my next step for the rear? If I had done more research I would have just gone with a flip kit from the start but to be honest I was scared of the c-notch. Can anyone here point me in the right direction?
Anywho... I know I can get drop spindles for the front for another 2" but what is my next step for the rear? If I had done more research I would have just gone with a flip kit from the start but to be honest I was scared of the c-notch. Can anyone here point me in the right direction?