Alright guys.. BILSTEINS post your pics!!!

[rdubs20]

New shoes


Sent from my iPhone using Tapatalk

What size lift and tires are you running?

 

[zstampe]

What size lift and tires are you running?

2.8" bils up front with a .75" spacer out back, tires are 275/65/20


Sent from my iPhone using Tapatalk

 

[vanalstinew]

Bils set at 1.75" with 33's... after looking through here, makes me want to go higher.

[/URL][/IMG]

[/URL][/IMG]

 

[powrsurg]

Bils set at 1.75" with 33's... after looking through here, makes me want to go higher.

[/URL][/IMG]

[/URL][/IMG]

Mine are at 2.1 and sometimes it looks like the front is higher than the back. I'd stick with 1.75 if I'd do it again and my 35's would fit

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[Drummin4jc]

My turn!! Mine are set at 2.1

Adam

 

[powrsurg]

Wait, something doesn't look right in that pic.

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[AustinB]

Wait, something doesn't look right in that pic.

Sent from my SAMSUNG-SM-N920A using Tapatalk

Whatcha think? I think it's the grass, never seen a bilstien pic somewhere other than a driveway.

IMO

 

[powrsurg]

I don't think you should be able to see the 5 rings when set at 2.1. Here's a pick of mine

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[AustinB]

He has 6" lift.

IMO

 

[powrsurg]

He has 6" lift.

IMO

That brings me back to a world that makes sense. Thanks

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[nclark112]

Finally installed mine today! Decided to set them at 2.1 with 35x12.50r20 Firestone Destination M/Ts


Sent from my iPhone using Tapatalk

 

[gofishn]

Finally installed mine today! Decided to set them at 2.1 with 35x12.50r20 Firestone Destination M/Ts


Sent from my iPhone using Tapatalk

WOW!

That is a really Sharp truck.

Even like the badges and the tape on the door pillars.
I never like the badge or door pillar tape!

 

[Csanders1992]

Set at 2.8" with nothing in the rear. 35x12.50 cooper st maxx on factory wheels without spacers. Everything clears perfect



Sent from my iPhone using Tapatalk

 

[nclark112]

WOW!



That is a really Sharp truck.



Even like the badges and the tape on the door pillars.

I never like the badge or door pillar tape!

Thank you! I appreciate it!


Sent from my iPhone using Tapatalk

 

[R.L.K.]

Set at 2.8" with nothing in the rear. 35x12.50 cooper st maxx on factory wheels without spacers. Everything clears perfect



Sent from my iPhone using Tapatalk

What size spacers Sir ?

 

[Csanders1992]

What size spacers Sir ?

No spacers were needed. There is plenty of clearance. These tires measure small for a 35x12.50


Sent from my iPhone using Tapatalk

 

[EagleChief]

Installed Bilstein's at 2.1.
Stock UCA.
Alignment done this morning. Still running stock tires until they wear out. Not the best pic... my driveway has a bit of a slope to it. My driver side measurement was 39.25" in rear and 38.5" in front.

Sent from my SM-N910V using Tapatalk

 

[RAMRAMRAM]

2.8 and 275 65 20. BFG's.... my clunking noise is gone since I had a shop take it to the top. very pleased. I think I had the top plate not tight enough... 38 5/8 ds 39 1/4 ps ---rear is 40 1/2 due to spring upgrade

Interesting. So you have a height difference too? I just installed Bilsteins and my drivers side is lower than my passenger side by about a half inch as well. Any idea why?

 

[cableguy_hd]

No unless maybe the top but is torqued a little more. They truck always has had a lean to it anyway though

 

[lukedukem]

Keep them comin