Amp Integration

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

wedge775

Senior Member
Joined
Aug 28, 2012
Posts
193
Reaction score
55
Location
Phenix City, AL
Ram Year
2010
Engine
5.7L Hemi
I'm gonna install an aftermarket amp in my crewcab, but keeping the OEM radio (RBZ radio). What integration harness would I need, the Pac Audio C2R-CHY or the C2A-CHY23?
 

jram1500

Member
Joined
Mar 25, 2013
Posts
97
Reaction score
8
Ram Year
2012
Engine
hemi 5.7
Do you currently have the OE Alpine amp?

Im also interested in this. I dont have the alpine system. I have the base system with sirius and u-connect

Sent from my SGH-I337M using Tapatalk
 
OP
OP
wedge775

wedge775

Senior Member
Joined
Aug 28, 2012
Posts
193
Reaction score
55
Location
Phenix City, AL
Ram Year
2010
Engine
5.7L Hemi
Anyone??? Or should I just use a Line Out Inverter hooked to the existing sub wires? Any suggestions welcome
 

LB3711

Senior Member
Supporting Member
Joined
Jan 23, 2011
Posts
18,512
Reaction score
1,788
Location
Trumbull, CT
Ram Year
2022
Engine
3.6L V6
I have the alpine system in my 2011 and I just used a LOC tapped off the sub wires. Amp and sub is all under the back seat. Only the power wire and the amp turn on wire come up front.


Sent from my Tapatalk equipped AT&T iPhone 5
 
OP
OP
wedge775

wedge775

Senior Member
Joined
Aug 28, 2012
Posts
193
Reaction score
55
Location
Phenix City, AL
Ram Year
2010
Engine
5.7L Hemi
I have the alpine system in my 2011 and I just used a LOC tapped off the sub wires. Amp and sub is all under the back seat. Only the power wire and the amp turn on wire come up front.


Sent from my Tapatalk equipped AT&T iPhone 5

Thinking that would be my easiest option.

Sent from my DROID RAZR using Tapatalk
 
Top