Zervun
Junior Member
- Joined
- Dec 25, 2014
- Posts
- 13
- Reaction score
- 3
- Ram Year
- 1999
- Engine
- Magnum 5.9
So on my 2001 Dodge quad cab the front window felt/seals are deteriorating and getting some light mold on them.
So I purchased some replacements from LMC because I want to get my front windows tinted soon.
I tried searching but couldn't find anything - I'm looking for advice on how to get these replaced and if i need to use any sealant (such as the 3m window sealant.
I have both the drip strips and the ones that go around the window for each side.
Unfortunately on the drivers side I "high end audioed" it up a while back and sealed it with Rammatt dampening material of multiple layers when I replaced the speakers so I'm assuming I am going to have to peel that off a bit to get access.
I did look in the service manuals but I didn't find any specifics on the seals.
So I purchased some replacements from LMC because I want to get my front windows tinted soon.
I tried searching but couldn't find anything - I'm looking for advice on how to get these replaced and if i need to use any sealant (such as the 3m window sealant.
I have both the drip strips and the ones that go around the window for each side.
Unfortunately on the drivers side I "high end audioed" it up a while back and sealed it with Rammatt dampening material of multiple layers when I replaced the speakers so I'm assuming I am going to have to peel that off a bit to get access.
I did look in the service manuals but I didn't find any specifics on the seals.