JamesRam
Senior Member
I have a 2008 2500 diesel with the 6 speed automatic. Great truck all around but I really really want a manual transmission. I'm curious if anyone on here has ever done the swap on a 3rd gen truck and what exactly is involved. There are a few obvious things such as
Transmission
Swapping shifters and getting the trim for the steering column
Clutch and i would assume some things would change as far as the flywheel?
What would need to be done for the transfer case?
Adding the clutch pedal
And I would guess you'd need to flash the ECM
What else would be needed to do swap it out?
Transmission
Swapping shifters and getting the trim for the steering column
Clutch and i would assume some things would change as far as the flywheel?
What would need to be done for the transfer case?
Adding the clutch pedal
And I would guess you'd need to flash the ECM
What else would be needed to do swap it out?