Believer45
Junior Member
I had my truck (2011 Ram 2500 6.7 auto, 166K miles) on ramps in my driveway working on an exhaust leak. I started it with the exhaust disconnected and backed it off the ramps, shut it off and the check engine light came on, a lot of codes came up. They will not clear, cannot clear check engine light. Anyone have any ideas where I should start?
Code | Status | Number | Comment |
P02E9 | Stored | 1 of 12 | Diesel Intake air flow position sensor circuit high level 2 of 3 |
P049D | Stored | 2 of 12 | EGR Control position exceeded learning limit |
P2579 | Stored | 3 of 12 | Turbo speed sensor circuit performance |
P2BAC | Stored | 4 of 12 | Nox exceedence - deactivation of EGR |
P049D | Pending | 5 of 12 | EGR Control position exceeded learning limit |
P02E9 | Pending | 6 of 12 | Diesel Intake air flow position sensor circuit high level 2 of 3 |
P2579 | Pending | 7 of 12 | Turbo speed sensor circuit performance |
P2BAC | Pending | 8 of 12 | Nox exceedence - deactivation of EGR |
P049D | Permanent | 9 of 12 | EGR Control position exceeded learning limit |
P02E9 | Permanent | 10 of 12 | Diesel Intake air flow position sensor circuit high level 2 of 3 |
P2579 | Permanent | 11 of 12 | Turbo speed sensor circuit performance |
P2BAC | Permanent | 12 of 12 | Nox exceedence - deactivation of EGR |