Cluster problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jksindiv

Junior Member
Joined
Sep 7, 2023
Posts
2
Reaction score
0
Location
Colorado
Ram Year
2012
Engine
Hemi 5.7
I have a 2012 RAM 1500 outdoorsman with the 5.7. I recently lost can bus to my cluster. All gauges go to zero, cluster lit up like a Christmas tree, radio turns off, no ac (but fan blows), no stability control, no park sensors, trailer brake says check fault, headlights constantly on, and wipers are constantly on. Only dude that pulls is u1449 for the body control node. Other than that or runs and drives fine. Sometimes fixes itself/happens again when I hit a decent bump or pothole. Took it to the dealership and they replaced the TIPM, didn't fix it, then they replaced the PCM and that didn't fix it. Now they don't want to work on it anymore. For the last week, its been happening constantly. So my question is had anyone else had this happen and what did you do to fix it or where is the body control node so I start checking the wiring or replace that myself. Thanks
 
OP
OP
J

jksindiv

Junior Member
Joined
Sep 7, 2023
Posts
2
Reaction score
0
Location
Colorado
Ram Year
2012
Engine
Hemi 5.7
Pics of the issue
 

Attachments

  • 20230907_160605.jpg
    20230907_160605.jpg
    223.5 KB · Views: 11
  • 20230907_160600.jpg
    20230907_160600.jpg
    145 KB · Views: 12
  • 20230907_160550.jpg
    20230907_160550.jpg
    147.8 KB · Views: 11

jws123

Senior Member
Joined
May 16, 2018
Posts
2,100
Reaction score
2,019
Location
nj
Ram Year
2014
Engine
5.7
I have a 2012 RAM 1500 outdoorsman with the 5.7. I recently lost can bus to my cluster. All gauges go to zero, cluster lit up like a Christmas tree, radio turns off, no ac (but fan blows), no stability control, no park sensors, trailer brake says check fault, headlights constantly on, and wipers are constantly on. Only dude that pulls is u1449 for the body control node. Other than that or runs and drives fine. Sometimes fixes itself/happens again when I hit a decent bump or pothole. Took it to the dealership and they replaced the TIPM, didn't fix it, then they replaced the PCM and that didn't fix it. Now they don't want to work on it anymore. For the last week, its been happening constantly. So my question is had anyone else had this happen and what did you do to fix it or where is the body control node so I start checking the wiring or replace that myself. Thanks
Have someone check the ignition switch common failure can cause all kinds of whacky things to happen stay far away from that dealer.
 
Top