- Joined
- Jul 17, 2012
- Posts
- 9,421
- Reaction score
- 4,704
- Location
- Conroe, TX
- Ram Year
- 2014 Ram 1500
- Engine
- Whipple Supercharged 422" Hemi
Did you take before/after measurements to see how much the rear dropped?
I will have a truck here tomorrow with the standard Belltech 2/4 kit installed, so I will check the clearance on the rear bumpstops. If I remember right, I had about 3/4" in the rear before I cut my coils and went with the shorter bumpstops. They are progressive rate stops, so it should not be harsh unless you hit a big bump and the stop compresses all the way down to the more aggressive setting.
I will have a truck here tomorrow with the standard Belltech 2/4 kit installed, so I will check the clearance on the rear bumpstops. If I remember right, I had about 3/4" in the rear before I cut my coils and went with the shorter bumpstops. They are progressive rate stops, so it should not be harsh unless you hit a big bump and the stop compresses all the way down to the more aggressive setting.