Drummin4jc
WWG1WGA!
- Joined
- Feb 3, 2015
- Posts
- 2,375
- Reaction score
- 1,218
- Location
- SW Pennsylvania
- Ram Year
- 2024 Ram 2500 CC
- Engine
- 6.4 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Wow that really is sharp. If I ever went back there in mine lol that's what I would want to see ...
Never know when you're going to need them. It was a relatively inexpensive mod. I put them on a separate toggle switch to match the rest of the toggles I have under the steering wheel.
Adam
Very nice...how about a switch in the bed?...wouldn't be relatively easy?
Sent from my iPhone using Tapatalk
Bull bar and center caps installed:
Adam
Love the build man, I had a couple questions for you about the bull bar. Did you have to remove the tow hooks and did the body lift effect the location of the cross bars relative to the truck? I keep going back and forth between this bar and a full bumper replacement but since I use the truck on the property I want to keep my front hooks.
Sorry I haven't been on in a few days. My truck did not come with tow hooks. The body lift did affect the bar height. The brackets hang down a little lower as well as the bar itself. But the install is still relatively simple.
Adam
Gotcha, I didn't think about it hanging down below the existing bumper. I probably should go with a bumper replacement so I can improve my approach angle. Looks great tho, thanks!
Hey Adam, truck looking incredible BTW. You and I have the Sam year, 2012, which of course preceded the factory use of led bulbs. When you did your LEDs, did you have to use the ubiquitous 50 watt 6ohm resisters,either pre wired or self wired? I have to think you did, but I've been wrong before.Today, I installed my 3157 Switchback LED's from RetroShop. I couldn't be any happier with how they turned out. Everything matches completely now as far as all LED lighting as well as all of it being white LED. And let me just give a shout out to Jeremy for his quick responses via e-mail as well as answering his phone when I had a quick question today. AWESOME customer service! Here's a couple of pics and a YouTube link to see them in action:
YouTube Video
Adam
Hey Adam, another question; how did you get the tape to stick on your steering wheel, and did you frame the standard "box" around the emblem? Btw, I'll post pics of all my dipped emblems later today; they came out great. In your opinion, should I post in members trucks, exterior, or photos & videos? ChrisBroke out the plasti-dip again and did my horn emblem. I'm going to try to find some of the same "red inserts" for this emblem to match my front and back ones.
Adam
Hey Adam, truck looking incredible BTW. You and I have the Sam year, 2012, which of course preceded the factory use of led bulbs. When you did your LEDs, did you have to use the ubiquitous 50 watt 6ohm resisters,either pre wired or self wired? I have to think you did, but I've been wrong before.
Hey Adam, another question; how did you get the tape to stick on your steering wheel, and did you frame the standard "box" around the emblem? Btw, I'll post pics of all my dipped emblems later today; they came out great. In your opinion, should I post in members trucks, exterior, or photos & videos? Chris
Never mind; I realized that after I mask off the rest of the wheel, the horn ring is black vinyl anyway. Here's that pic
And while I'm at it, here are pics of the emblems when I got done
Sent from my 9020A using Tapatalk
What are you talking about? Those letters are fine. Someone must have hijacked my images!LOL: nice to hear from you - ChrisWhich LED's are you talking about? Are you meaning my "switchback" turn signals? If so, RetroShop provides everything you need for them including the resistors. They are pre-wired but you need to splice them in.
I think you did a good job but you need to get a toothpick and remove the access in the ''0" and the "R" and "A" of RAM. You can post this under "Exterior" and "Photos & Videos".
Adam
What are you talking about? Those letters are fine. Someone must have hijacked my images!LOL: nice to hear from you - Chris
Sent from my 9020A using Tapatalk
I'm jealous on the bed lighting. I've been talking about that for nearly a year and still haven't done it. We bought a house back in October and that's where my time goes. My poor truck is so neglected right now, lol.
The lighting in the bed looks great though.
Well, the last of the chrome is gone...
Sent from that thing I'm carrying around