Tonyt2293
Junior Member
- Joined
- Jul 19, 2022
- Posts
- 8
- Reaction score
- 2
- Location
- Apple Valley ca
- Ram Year
- 1998,2005
- Engine
- 5.9 cummins, 5.7 hemi
So about a year ago I have my pre eagle rebuilt while come to find out the shop didn't set the rings correctly and on a long trip towing a trailer two pistons failed and destroyed the engine so back to the drawing board
Was going to do a eagle head swap but my block was trash and ended up with a eagle long block from the junk yard. Was told it was a 06 long block I should have checked before loading up . Definitely a 09+ block
If I wanted to drop this in my 05 1500 non mds non vct
I would need to plug the mds and disable the vct correct?
Could i just plug the selonoid and use my cam gear from my 05 Instead of a phaser lock out ?
And also need to swap over my reluctor from my 05 crank correct?
I will be rebuilding it myself this time which I should have done in the first place
Was going to do a eagle head swap but my block was trash and ended up with a eagle long block from the junk yard. Was told it was a 06 long block I should have checked before loading up . Definitely a 09+ block
If I wanted to drop this in my 05 1500 non mds non vct
I would need to plug the mds and disable the vct correct?
Could i just plug the selonoid and use my cam gear from my 05 Instead of a phaser lock out ?
And also need to swap over my reluctor from my 05 crank correct?
I will be rebuilding it myself this time which I should have done in the first place