Eibach pro truck actual lift?

[Jasfish18]

Truck is a 2017 4x4 quad cab hemi

I've been searching forums and can only find a few actual measurements. I dont want the truck to be leveled out
At the time I have 2in of rake and want to maintain or possibly down to 1in min.

I like the idea of longer springs over preload on factory springs.

 

[crazykid1994]

If you’re planing on just lifting 1-2” go with bilstein 5100. No need for longer springs for that. Ride is fine. I had bilstein set to 2.1 and ride was fine. Still felt stock. I received 2” from the longer eibach springs on the lowest setting.

 

[Jasfish18]

Thanks for all your replies crazykid1994,
I was originally wanting to go with 2in mopar lift, but heard the springs are pretty soft

 

[crazykid1994]

I’m pretty sure the moose lift is just bilstein 5100 but badges for “mopar” and resides your stock springs up front as well.

 

[sequoia464]

I just happen to have a 2017 4x4 quad cab hemi. Just a few weeks ago I put on some Eibachs front and back.

I retained my stock springs in the front, and had already been using TuffTruck 1211's in the rear.

I added a 1" Daystar space in the back, set the front on the middle groove that is supposed to give 1 1/2" for the front.

I got 1 1/2" in the front.

 

[JB1]

Thanks for all your replies crazykid1994,
I was originally wanting to go with 2in mopar lift, but heard the springs are pretty soft

Ya the mopar lift uses superlift rear coils

 

[brad_12]

I’m pretty sure the moose lift is just bilstein 5100 but badges for “mopar” and resides your stock springs up front as well.

Is this moose lift new to the market? LOL

Any specs? LOL

 

[crazykid1994]

Is this moose lift new to the market? LOL

Any specs? LOL

Damn. I didn’t even catch that. Autocorrect wins again... lmao

 

[brad_12]

That one was too funny to pass up.

Back on track...Yeah I would pass on that mopar lift for sure for the little changes you want. Especially for that price.

 

[Hammer22801]

I just ordered my eibach pro lift and a set of zone UCA’s.

2019 ram 1500 classic

stock heights

DF 37
PF 37

DR 40
PR 40

front bumper (bottom to ground) 15

back bumper (bottom to ground) 22

 

[crazykid1994]

I just ordered my eibach pro lift and a set of zone UCA’s.

2019 ram 1500 classic

stock heights

DF 37
PF 37

DR 40
PR 40

front bumper (bottom to ground) 15

back bumper (bottom to ground) 22

Measure your center if hub to fender for a proper measurement. Better for future in case you swap tires and such.

 

[Hammer22801]

I did that too

both fronts were 22 center of hub to fender

both tears were 24

 

[Jasfish18]

Picked up the whole kit front and back shocks and springs for 524 otd!
Is zone the best option for uca? I know alot of people use them.
I am hoping to still have some rake. If not I will probably be looking for a small rear spacer. What brand , material, top or bottom mount?
Thanks guys