Engine wiring harness help

[Bluethunder]

I have a 99 Dodge Ram 2500 v10 and it got a hole in the piston. So I got a new engine from the best scrap yard in Montana but it's a 1995. I have to change all manifolds cam sensor and cam sprocket. But I got to looking last night and noticed the wiring harness was different so I looked everywhere on the Internet that I could think of and couldn't find a new harness for a 1999. If anyone knows where to find one please help.

 

[rowdyram]

What is different?

 

[Bluethunder]

The connectors on the computer and fuse box are different same with alternator connector

 

[rowdyram]

Use your 99 harness. Whatever is different on the engine swap with your original. There will not be a conversion harness available for what your doing.

 

[Bluethunder]

My wires were brittle and broke the insulation I'm just looking for a new 99 harness. The 99 is compatible on the 95 engine. I talked to my cousin who is a certified dodge mechanic and he said he doesn't know if dodge sells new harnesses for it or not. I found a harness for a 94 and 95 v10 but none for 99

 

[rowdyram]

Oh, I get it now. EBay would be my first thought its been my experience that even if a harness is available its near cheaper to buy a new truck...
You could always buy some new wire loom and redo it.

 

[Merc225hp]

Pre 2001 parts numbers are not updating for me, but I did find you a part number out of the 2001 parts book # 56045610AC before 06/26/00, as Rowdyram posted $1543.08

 

[aofarrell2]

I know of a place nearby that can get you a harness in good condition for around $200, PM me and I'll give you their number. No sense paying $1500 for a brand new one, unless you want to..