hardknocks
Junior Member
- Joined
- Jan 29, 2016
- Posts
- 15
- Reaction score
- 0
- Ram Year
- 2016
- Engine
- cummins
what is the option VSIM for? is it the aux switch panels. trying to figure out the pacakage to order
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
so if u get the aux switches are the prewired into the fuse box. or is that with the module. could you explain a little more please. what im trying to say is . if i install extra lights for say the bed area is there a plug somewhere on the truck that i can plug them into that is already prewired to a certain AUX switch. so i do not have to run wires to the switch and tear dash apart to connect?
So after watching these videos am I to understand that if I add a light bar and want to use my upfitter switches to control it all I need to do is provide a ground a connect the red wire going to the light at the module under the hood? Most of the lights I've looked at come with a wire harness with fuse and relay but it sounds like they are already there with the snow plow package??
That's what I thought but I haven't been able to find a definite answer anywhere, if that's the case I wouldn't need to connect directly to the battery like I would with the harness that came with the light but I suppose adding the light harness really wouldn't hurt anything.