Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yeah I absolutely loved it..I always wanted one. It had a lot of sentimental value too as my grandma went with me to buy it and I named it after her. She is still alive, I know that made it seem like she isn't but we are extremely close. however, it felt a little easier to lose it eventhough it was named after her as we named our daughter after her! so it balanced it out in my head haha, a car can always be temporary, her legacy will live on forever with a child.A B5 Charger....drool...man I wished they would bring that color back. I have considered this summer getting a Charger Scat Pack....wished they still did B5.
Just bumping this for a hope of an answerSo I have a few questions I could use some help on.
I want to get this leveled, but I have been reading this needs about a 2.5" lift in the front to level it, and that is unsafe on spacers. Is billsteins the only option then? A little too pricey for me to do now as that's when I want to do it haha.
I want to get some new tires but want to level it first but need to figure it out.
As well, what is a good brand for HID/LED headlights? I have always bought from diode but if I have to buy the low beam/high beam/and fog light that's well over 500$ and I am always seeing lights on ebay for like 15$? so what gives. what should I look for and what should I avoid?
Could I just get the bill stein struts for around 200$ and put that with my stock springs and such for a lift? Or do I need the full like 500$ kit?if you have a 4x4, the Bilsteins are best option. I think Maxtrac has 4x4 level parts as well. Once you level, you can go up to 35's. I leveled mine, and did a Nitto Terra Grappler G2 in 285/65/20 on a 20x9, no rubbing at all.
LED bulbs may be the easy part, finding the correct load resistors for the LED's is the biggest challenge.
And if so, will the control arm angle be too much and add too much stress on it? Not keeping it parallel as it is stock?if you have a 4x4, the Bilsteins are best option. I think Maxtrac has 4x4 level parts as well. Once you level, you can go up to 35's. I leveled mine, and did a Nitto Terra Grappler G2 in 285/65/20 on a 20x9, no rubbing at all.
LED bulbs may be the easy part, finding the correct load resistors for the LED's is the biggest challenge.