SERGE PICARD
Junior Member
Did you upgrade your UCA's?
Seeing this, then my measurements mentioned above would be off...LOL
This is how I want it to sit.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I know this is an older post but looks great! Exactly what I want to do, I'd be curious to know the overall height to the top of the shark fin as I would still like to park in my garage with a 7ft door.Leveled using a spacer in front (since 5100s are backordered everywhere), with Method MR701 in 17”x8.5” ET 0, and BFG ko2 in 35”x12.5”.
I know this is an older post but looks great! Exactly what I want to do, I'd be curious to know the overall height to the top of the shark fin as I would still like to park in my garage with a 7ft door.
Awesome! I really appreciate the info! Looks good, I want to go with a similar setup but have to go with a lower bed rack so I can get in the garage.Thanks! It’s approximately 6’6” from the floor to the top of the shark fin. I say approximately, because I do currently have a bed rack and rooftop tent on the truck and that causes the rear to sag slightly.
View attachment 490506
Awesome! I really appreciate the info! Looks good, I want to go with a similar setup but have to go with a lower bed rack so I can get in the garage.
Yeah it's a constant battle between practicality and functionality, and of course what I want versus what I need...LOL.Not a problem! Thank you. I originally got the rack at cab height because I wanted to fit bikes in the bed with a tailgate pad. I recently purchased a hitch mounted rack and now wish I could lower the tent a bit.
Love your truck. What size tires and wheels are those? Spacers?Thanks! It’s approximately 6’6” from the floor to the top of the shark fin. I say approximately, because I do currently have a bed rack and rooftop tent on the truck and that causes the rear to sag slightly.
View attachment 490506
Looks good! What size wheels?Did you upgrade your UCA's?
Seeing this, then my measurements mentioned above would be off...LOL
This is how I want it to sit.