Her 3rd Birthday is coming up... Don't know what to get her!

[CMil527]

Turned out great!

 

[DavidRam]

Thanks bro!!!

 

[O.R.T.]

So, seriously man, you're gonna make us all search how you plastidipped (or what) your emblems? Don't suppose you have the measurement line for where they're placed since I didn't think of that step before debadging mine? I just went from the top of the fender lip and leveled off the bottom of the driver's door glass trim to spot my vinyl.

I only ask b/c I took my fender "MOPAR" badging off. Didn't sit right still (IMHO).

NVM. Found part of it:

Re-Badge Possee! get 'Yer Badg-eeze Here.

 

[DavidRam]

So, seriously man, you're gonna make us all search how you plastidipped (or what) your emblems? Don't suppose you have the measurement line for where they're placed since I didn't think of that step before debadging mine? I just went from the top of the fender lip and leveled off the bottom of the driver's door glass trim to spot my vinyl.

I only ask b/c I took my fender "MOPAR" badging off. Didn't sit right still (IMHO).

NVM. Found part of it:

Re-Badge Possee! get 'Yer Badg-eeze Here.

I can measure where they sit tomorrow. I just put them exactly where the factory ones were so I didn't have to measure.

 

[O.R.T.]

Do it, but also see if there's a common sight/mount-line to them. I'd do it myself but it'd have to wait until I'm back next week.

Picture me showing up, while still on vacation, asking to borrow one from inventory for that.

 

[DavidRam]

Do it, but also see if there's a common sight/mount-line to them. I'd do it myself but it'd have to wait until I'm back next week.

Picture me showing up, while still on vacation, asking to borrow one from inventory for that.

Lol!

Ok, will do. It might have some relation to the gas cap, but I am not sure...

What I would really like to know is where these black and read badges are from. I couldn't find any vehicles that had them stock... Chrysler, Jeep, etc.?

 

[VegasDragger45]

My brother in-law that works at dodge in NC said they are from a jeep but didn't say what model.


Sent from my iPhone using Tapatalk

 

[kcbigbadram]

Lol!

Ok, will do. It might have some relation to the gas cap, but I am not sure...

What I would really like to know is where these black and read badges are from. I couldn't find any vehicles that had them stock... Chrysler, Jeep, etc.?

Those badges are on the ignition orange ram. They only made 1000 of them though.
I would bet they will also will be on the black sport package that is coming out too

 

[DavidRam]

Those badges are on the ignition orange ram. They only made 1000 of them though.
I would bet they will also will be on the black sport package that is coming out too

Damn! You are good! Thanks man! Kinda surprised that they put red on the orange, though.

 

[DavidRam]

Do it, but also see if there's a common sight/mount-line to them. I'd do it myself but it'd have to wait until I'm back next week.

Picture me showing up, while still on vacation, asking to borrow one from inventory for that.

Ok, the badge is 25" from the very bottom of the fender and 1" away from the lip. It is parallel to (or level with) the crease that runs along the lower part of the door and bed. Otherwise it does not line-up or have anything in common with anything.

 

[rob2388]

Definitely new set of 22's man. Time for some new shoes with 20k already into the truck, then the bed cover.

 

[DavidRam]

Definitely new set of 22's man. Time for some new shoes with 20k already into the truck, then the bed cover.

You are right, sir! I am getting sooooo close to getting new shoes... Oops, forgot to post a pic of the caliper covers in here:

 

[BlownGP]

Thanks guys!!! I have been thinking about wheels off and on... I really like my factory wheels a lot and the tires are still in great shape, buuuuuut if I was to do wheels I have already decided these would be the ones in 22". I think my custom brake calipers would look nice peeking through the Dub Skillz

Those Dub wheels only come in 6 lug. Maybe they could make drill you a set in 5 lug..

I'm not sure what Dub's deal is with making rims in our bolt pattern. But there's not many......

HRE's are forged man, so they won't be cheap.
I would say some nice 22s would complete the look, as you know selection is limited unless you go forged.

 

[DavidRam]

Those Dub wheels only come in 6 lug. Maybe they could make drill you a set in 5 lug..

I'm not sure what Dub's deal is with making rims in our bolt pattern. But there's not many......

HRE's are forged man, so they won't be cheap.
I would say some nice 22s would complete the look, as you know selection is limited unless you go forged.

Btw, after lots of searching I found out they are only 31lbs. If you are right about mine being 34lbs (though I kinda remember them being less than that), than I would actually be reducing the weight!

 

[BlownGP]

That would be nice..
I would call them and ask them for sure though. 31lbs is low for a cast 22" wheel..

 

[DavidRam]

I was wrong, they are 33lbs.

 

[GreenClassic]

I say go for the wheels. It'll bring your truck to a whole new level.

 

[BlownGP]

I was wrong, they are 33lbs.

Not bad!!! I like them

 

[DavidRam]

Graygoose hooked me up with some 3m vinyl and I decided not to cover the hood cowl with it, but rather make some hood stripes (still to come) and a little detail on my front bumper that I have been wanting to do for a long time.

Ta da...

Can you see it? Just below that plastic cover?

 

[DavidRam]

Better pic.