Micah201
Junior Member
- Joined
- Jan 25, 2015
- Posts
- 12
- Reaction score
- 0
- Location
- New Iberia, LA
- Ram Year
- 2003 & 2007
- Engine
- 5.7 Hemi & 5.9 CTD
"The external grounding works better on some truck over others. Most likely depending on the individual trucks grounding. The PCM uses both a clean (filtered) ground and a chassis ground. I have a external ground wire that runs from the PCM to the TB to a valve cover bolt and finally to the fender by the battery."
That's pretty close to the same route I was thinking of taking. I figure the easier the path to ground the better, so why not tie it into everything.
That's pretty close to the same route I was thinking of taking. I figure the easier the path to ground the better, so why not tie it into everything.