Lifted 4th Gen Pics - Show Em Off!

[AceBlackRam]

Brandon your truck is awesome!!!

 

[bamablack11]

I like this thread.. I think level, 4"&6" lift all look great on this truck.. But I think I'm set on the zone 4/2 lift.. I'm not gunna run 35s though.. I thinking going to do a 305/60 or a 286/65.. Equals out to a 34.6 ish and 11.2-12" wide.. Should be able to keep them on stock wheels with no worries about a spacer..

 

[BMD]

I like this thread.. I think level, 4"&6" lift all look great on this truck.. But I think I'm set on the zone 4/2 lift.. I'm not gunna run 35s though.. I thinking going to do a 305/60 or a 286/65.. Equals out to a 34.6 ish and 11.2-12" wide.. Should be able to keep them on stock wheels with no worries about a spacer..

The 295/65/20 is a great fit with factory wheels

 

[bamablack11]

What tires are in 295/65.. I'm digging Cooper st maxx but they don't have any sizes I want.. The closest is 275/65.. Its a 34 x11..

 

[BMD]

What tires are in 295/65.. I'm digging Cooper st maxx but they don't have any sizes I want.. The closest is 275/65.. Its a 34 x11..

Nitto and toyo both make it require no spacers and are full 35.1 tall and 12 wide instead of 12.5 no rubbing.

 

[bamablack11]

Is that on a 4" lift or a level? I just got a set of power wagon flares.. I think im gunna run the 295/60 nitto trail mts... and a 1/4 spacer.. Should sit pretty flush.. And if I think the spacers not working right I can just yank them and the tire will still fit.. Or at least that's my set up plan till I find a different tire I like..

 

[bamablack11]

I just need somebody with the power wagon flares to tell me the actual coverage They provide.. I think it's 1"

 

[BMD]

Is that on a 4" lift or a level? I just got a set of power wagon flares.. I think im gunna run the 295/60 nitto trail mts... and a 1/4 spacer.. Should sit pretty flush.. And if I think the spacers not working right I can just yank them and the tire will still fit.. Or at least that's my set up plan till I find a different tire I like..

Level

 

[bamablack11]

Looks good... Makes me more excited bout mine.. 8 days away...

 

[Donelam304]

Nitto and toyo both make it require no spacers and are full 35.1 tall and 12 wide instead of 12.5 no rubbing.

My TOYO Open Country MT's 35/12.50 /18s on the front rub at full turn to the left.

 

[BMD]

My TOYO Open Country MT's 35/12.50 /18s on the front rub at full turn to the left.

That is why I went with the 295/65/20 on her truck they are not as wide as the 35x12.5

 

[draken]

Here's a few i took a couple of days ago.

 

[Thatdude596]

2012 Laramie Limited 3500
8" BDS long arm lift with Fox 2.0 shocks
1" TGC front coil spacers
Fox 2.0 dual steering stabilizer
HBS steering box stabilizer
22x12 -40 offset American Force Independence SS8's
37x13.5 Toyo MT's

Obviously a ton of other mods as well... If you want the full mod list let me know.

This just might be one of the cleanest looking build I have seen. Looks freaking kick ass man! Nice job

 

[Cruizer]

Here's a few i took a couple of days ago.

That's a bad ass lookin' truck!

 

[draken]

That's a bad ass lookin' truck!

Thanks man i appreciate it! Just looking for more to do to it now haha

 

[DohCanadian]

Can't remember if I posted here yet, but I don't think so. Plus I just went higher.

2013 Ram 1500
6" Rough Country Lift
Bilstein 5100's in front set at 2.1"
Airlift 1000 bags in the rear.
295/65R20 Nitto Trail Grapplers on 20x9 Rockstar 2s

(This first pic was before Bilstein's, just wanted to show off the rear)


(This was with level)

 

[Thatdude596]

Is it the angle of the pic or is rear lower?

 

[DohCanadian]

Is it the angle of the pic or is rear lower?

It's mostly the angle, but I did measure and the rear is probably lower by roughly half an inch or less. Plus the Bilstein's will settle a little bit so it should be perfect.

 

[tones2SS]

That is very nice.

 

[jstacey8]

Not as nice as others but gets the job done for now