shaunharrp413
Junior Member
- Joined
- Apr 28, 2016
- Posts
- 28
- Reaction score
- 44
- Ram Year
- 2015
- Engine
- 5.7 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yes looks sharp, and do you mind sharing exactly what you had done please ?
Damn that looks good shaunharrp413. I've always regretted not getting a white ram. They just look damn good.
Here is my 2012 Ram 1500 2WD. I am running the Maxtrac 4.5" Spindle in the front and the 1.5" spacer in the rear. Wheels are 22x12 with -44 Offset, tires are 35x12.50r22 Atturo Trail Blade M/T's. It did scrub a little so I had to do some minor trimming on the lower front valance and rear inner fender pinch mold to make it work. Still rubs a little in reverse.
I see you have the Magnum ICI RT steps with the Bushwacker Pocket Flares.
Did you have to alter/cut the ICI steps in order to fit them with the flares.
Someone on this forum or another mentioned that they had to cut the end of the step rock rail portion where it meets the flares in order for it to fit.
Also, does the rockrail portion of the ICI step sit tight under the rockers with little gap. I was looking at the Iron Cross HD Steps but people have complained about them hanging to low with a big gap between the rockrail & the rocker panel.
Wow that looks great for a 2wd !
Got any Sideview pics of the offset ?
I have the same setup and only rubbed on the front bumper.
Sent from my iPhone using Tapatalk